PC138US-8 Slew Motor 706-7C-01010	Unit, Type:Insert Bearing Unit; Basic Load Rating, Dynamic Rating(N):113000; Fit:J7; Unit Body Material:Cast Iron; RoHS:6; Grease Type:Standard Grease; Accessory:With steel plate cov; Machining:No; Stroke:No;
PC40MRX-1 Slew Motor 708-7R-00250	Z:47.3 mm; T min.:-20 °C; J:104.2 mm; A:36.5 mm; G:M6x1; Designation of housing:PLE205N-; H1:12.8 mm; C0:7.88 kN; A1:24.5 mm; N1:17 mm;
PC30-6 Slew Motor 708-7T-00031	Characteristic rolling element frequency, BSF:4.15 Hz; Characteristic outer ring frequency, BPF0:3.09 Hz; Outside Diameter:6.693 Inch | 170 Mil; UNSPSC:31171504; Nlim (grease):4,000 rpm; Long Description:80MM Bore; 170MM Out; f0:13.3; rs min:2.1 mm; Minimum Buy Quantity:N/A; ra max:2 mm;
PC150LC-3 Slew Motor 706-75-11501	da min:104 mm; Brand:SNR; rs min:3 mm; k:5 mm; d2:110.1 mm; e:0.33; Y1:2.06; Da max:176 mm; Min operating temperature, Tmin:-40 °C; Associated sleeve reference:H2318;
PC40R-8 Slew Motor 708-7R-00014	Unit, Type:Insert Bearing Unit; Basic Load Rating, Dynamic Rating(N):113000; Fit:J7; Unit Body Material:Cast Iron; RoHS:6; Grease Type:Standard Grease; Accessory:With steel plate cov; Machining:No; Stroke:No;
PC130-6K Slew Motor 706-73-01180	Flange Shape:Square Type; Volume Discount:Available; Seals:DD (Contact Rubber S; Shape:Flange Type; RoHS:6; Bearing Retained:No; Bearing Part Number:606; Bearing Used:Deep Groove Ball Bea; Bearing Material:[Steel] Steel;
PC120-3 Slew Motor 706-73-10500	Z:47.3 mm; T min.:-20 °C; J:104.2 mm; A:36.5 mm; G:M6x1; Designation of housing:PLE205N-; H1:12.8 mm; C0:7.88 kN; A1:24.5 mm; N1:17 mm;
PC200-7 Slew Motor 706-7G-01040	Characteristic rolling element frequency, BSF:4.15 Hz; Characteristic outer ring frequency, BPF0:3.09 Hz; Outside Diameter:6.693 Inch | 170 Mil; UNSPSC:31171504; Nlim (grease):4,000 rpm; Long Description:80MM Bore; 170MM Out; f0:13.3; rs min:2.1 mm; Minimum Buy Quantity:N/A; ra max:2 mm;
PC100-6 Slew Motor 706-73-01181	T max.:200 °C; A2:35.7 mm; A1:13 mm; S:14.3 mm; L:68 mm; Dz:60 mm; H:130 mm; C:14 kN; Designation of closed end cover:SCC205; Z:39.6 mm;
PC200LC-8 Slew Motor 706-7G-01170	Z:52.7 mm; Dz:70 mm; S:15.9 mm; A1:27.5 mm; C0:11.2 kN; T max.:100 °C; H1:14.5 mm; s1:19.05 mm; A:41.5 mm; Designation of closed end cover:SCC206;