| PC220-2 Slew Motor 706-75-02500 | Bearing Used:Deep Groove Ball Bea; Seals:VV (Non-Contact Rubb; Housing Material:1045 Carbon Steel; C Chamfered:Not Provided; Bearing Part Number:698; Bearing Material:[Steel] Steel; Shape:T-Shaped; Height H(mm):20 ～ 30; RoHS:6; |
| PC130-6K Slew Motor 706-73-01180 | Flange Shape:Square Type; Volume Discount:Available; Seals:DD (Contact Rubber S; Shape:Flange Type; RoHS:6; Bearing Retained:No; Bearing Part Number:606; Bearing Used:Deep Groove Ball Bea; Bearing Material:[Steel] Steel; |
| PC200LC-3 Slew Motor 706-75-11900 | Z:47.3 mm; T min.:-20 °C; J:104.2 mm; A:36.5 mm; G:M6x1; Designation of housing:PLE205N-; H1:12.8 mm; C0:7.88 kN; A1:24.5 mm; N1:17 mm; |
| PC220LC-3 Slew Motor 706-75-11302 | Z:47.3 mm; T min.:-20 °C; J:104.2 mm; A:36.5 mm; G:M6x1; Designation of housing:PLE205N-; H1:12.8 mm; C0:7.88 kN; A1:24.5 mm; N1:17 mm; |
| PC120LC-6 Slew Motor 706-73-01181 | Shaft:Provided; Allowable Rotational Speed(rpm):9800; Thread Size on Cam Follower (M)(mm):M12; Roller Lining:None; Volume Discount:Available; Basic Load Rating Cr (Dynamic)(kN):7.87; B:14; Seals:Provided; |
| PC200-8 Slew Motor 706-7G-01170 | Type:Ball; Transmitter Material:Steel; Allowable Rotational Velocity(Grease Lubrication)(rpm):3600; Bearing Style:Open Type; Size Standards:Metric System; Sealing Structure:Open Type; Load Type:Radial; Precision:Grade 0; |
| PC200-2 Slew Motor 706-75-04700 | Z:52.7 mm; Dz:70 mm; S:15.9 mm; A1:27.5 mm; C0:11.2 kN; T max.:100 °C; H1:14.5 mm; s1:19.05 mm; A:41.5 mm; Designation of closed end cover:SCC206; |
| PC50UU-2 Slew Motor 708-7T-00160 | Z:47.3 mm; T min.:-20 °C; J:104.2 mm; A:36.5 mm; G:M6x1; Designation of housing:PLE205N-; H1:12.8 mm; C0:7.88 kN; A1:24.5 mm; N1:17 mm; |
| PC130-6 Slew Motor 706-73-01161 | Characteristic rolling element frequency, BSF:4.15 Hz; Characteristic outer ring frequency, BPF0:3.09 Hz; Outside Diameter:6.693 Inch | 170 Mil; UNSPSC:31171504; Nlim (grease):4,000 rpm; Long Description:80MM Bore; 170MM Out; f0:13.3; rs min:2.1 mm; Minimum Buy Quantity:N/A; ra max:2 mm; |
| PC50UU-2 Slew Motor 708-7R-00050 | Type:Ball; Transmitter Material:Steel; Allowable Rotational Velocity(Grease Lubrication)(rpm):3600; Bearing Style:Open Type; Size Standards:Metric System; Sealing Structure:Open Type; Load Type:Radial; Precision:Grade 0; |