| PC210LC-6LE Slew Motor 706-75-01101 | Z:47.3 mm; T min.:-20 °C; J:104.2 mm; A:36.5 mm; G:M6x1; Designation of housing:PLE205N-; H1:12.8 mm; C0:7.88 kN; A1:24.5 mm; N1:17 mm; |
| PC40-5 Slew Motor 20T-60-00410 | L:161.5 mm; N1:24.5 mm; Z:52.7 mm; N:14mm; Designation of bearing:UC206-19G2T04; T max.:100 °C; Designation of open end cover:SCOU206-19; J:119 mm; B:38.1 mm; C:19.5 kN; |
| PC200LC-6LE Slew Motor 706-75-01150 | Characteristic rolling element frequency, BSF:4.15 Hz; Characteristic outer ring frequency, BPF0:3.09 Hz; Outside Diameter:6.693 Inch | 170 Mil; UNSPSC:31171504; Nlim (grease):4,000 rpm; Long Description:80MM Bore; 170MM Out; f0:13.3; rs min:2.1 mm; Minimum Buy Quantity:N/A; ra max:2 mm; |
| PC75UU-1 Slew Motor 706-73-01060 | Characteristic rolling element frequency, BSF:4.15 Hz; Characteristic outer ring frequency, BPF0:3.09 Hz; Outside Diameter:6.693 Inch | 170 Mil; UNSPSC:31171504; Nlim (grease):4,000 rpm; Long Description:80MM Bore; 170MM Out; f0:13.3; rs min:2.1 mm; Minimum Buy Quantity:N/A; ra max:2 mm; |
| PC220LC-3 Slew Motor 706-75-11300 | Characteristic rolling element frequency, BSF:4.15 Hz; Characteristic outer ring frequency, BPF0:3.09 Hz; Outside Diameter:6.693 Inch | 170 Mil; UNSPSC:31171504; Nlim (grease):4,000 rpm; Long Description:80MM Bore; 170MM Out; f0:13.3; rs min:2.1 mm; Minimum Buy Quantity:N/A; ra max:2 mm; |
| PC78US-8 Slew Motor 708-7S-00290 | Flange Shape:Square Type; Volume Discount:Available; Seals:DD (Contact Rubber S; Shape:Flange Type; RoHS:6; Bearing Retained:No; Bearing Part Number:606; Bearing Used:Deep Groove Ball Bea; Bearing Material:[Steel] Steel; |
| PC40R-8 Slew Motor 708-7R-00042 | Shape:Flange Type; Flange O.D. H(φ):41; Number of Bearings:Double; RoHS:6; Width T(mm):30; Volume Discount:Available; Type:Bearings with Housin; Seals:VV (Non-Contact Rubb; |
| PC160LC-8 Slew Motor KBB0440-85018 | A1:11 mm; Weight:0.65 kg; L:86 mm; A:25.5 mm; Designation of bearing:EX203G2L4; S:17 mm; T max.:100 °C; G:M6x1; J:64 mm; B1:43.5 mm; |
| PC160LC-7-E0 Slew Motor KBB0440-85015 | Unit, Type:Insert Bearing Unit; Basic Load Rating, Dynamic Rating(N):113000; Fit:J7; Unit Body Material:Cast Iron; RoHS:6; Grease Type:Standard Grease; Accessory:With steel plate cov; Machining:No; Stroke:No; |
| PC150LC-3 Slew Motor 706-75-11501 | Shaft:Provided; Allowable Rotational Speed(rpm):9800; Thread Size on Cam Follower (M)(mm):M12; Roller Lining:None; Volume Discount:Available; Basic Load Rating Cr (Dynamic)(kN):7.87; B:14; Seals:Provided; |