| PC128US-2 Slew Motor 706-73-01241 | Z:52.7 mm; Dz:70 mm; S:15.9 mm; A1:27.5 mm; C0:11.2 kN; T max.:100 °C; H1:14.5 mm; s1:19.05 mm; A:41.5 mm; Designation of closed end cover:SCC206; |
| PC120-6Z Slew Motor 706-73-01180 | Z:47.3 mm; T min.:-20 °C; J:104.2 mm; A:36.5 mm; G:M6x1; Designation of housing:PLE205N-; H1:12.8 mm; C0:7.88 kN; A1:24.5 mm; N1:17 mm; |
| PC120-6 Slew Motor 706-73-01181 | Shaft:Provided; Allowable Rotational Speed(rpm):9800; Thread Size on Cam Follower (M)(mm):M12; Roller Lining:None; Volume Discount:Available; Basic Load Rating Cr (Dynamic)(kN):7.87; B:14; Seals:Provided; |
| PC40R-8 Slew Motor 708-7R-00013 | Characteristic rolling element frequency, BSF:4.15 Hz; Characteristic outer ring frequency, BPF0:3.09 Hz; Outside Diameter:6.693 Inch | 170 Mil; UNSPSC:31171504; Nlim (grease):4,000 rpm; Long Description:80MM Bore; 170MM Out; f0:13.3; rs min:2.1 mm; Minimum Buy Quantity:N/A; ra max:2 mm; |
| PC27MR-3 Slew Motor 708-7R-00380 | Flange Shape:Square Type; Volume Discount:Available; Seals:DD (Contact Rubber S; Shape:Flange Type; RoHS:6; Bearing Retained:No; Bearing Part Number:606; Bearing Used:Deep Groove Ball Bea; Bearing Material:[Steel] Steel; |
| PC200-6 Slew Motor 706-75-01100 | da min:104 mm; Brand:SNR; rs min:3 mm; k:5 mm; d2:110.1 mm; e:0.33; Y1:2.06; Da max:176 mm; Min operating temperature, Tmin:-40 °C; Associated sleeve reference:H2318; |
| PC75UU-3 Slew Motor 708-7T-00410 | A1:11 mm; Weight:0.65 kg; L:86 mm; A:25.5 mm; Designation of bearing:EX203G2L4; S:17 mm; T max.:100 °C; G:M6x1; J:64 mm; B1:43.5 mm; |
| PC100-3 Slew Motor 706-73-10500 | Characteristic rolling element frequency, BSF:4.15 Hz; Characteristic outer ring frequency, BPF0:3.09 Hz; Outside Diameter:6.693 Inch | 170 Mil; UNSPSC:31171504; Nlim (grease):4,000 rpm; Long Description:80MM Bore; 170MM Out; f0:13.3; rs min:2.1 mm; Minimum Buy Quantity:N/A; ra max:2 mm; |
| PC200LC-5C Custom Slew Motor 706-75-01100 | Shape:Flange Type; Flange O.D. H(φ):41; Number of Bearings:Double; RoHS:6; Width T(mm):30; Volume Discount:Available; Type:Bearings with Housin; Seals:VV (Non-Contact Rubb; |
| PC45MRX-1 Slew Motor 708-7R-00131 | Flange Shape:Square Type; Volume Discount:Available; Seals:DD (Contact Rubber S; Shape:Flange Type; RoHS:6; Bearing Retained:No; Bearing Part Number:606; Bearing Used:Deep Groove Ball Bea; Bearing Material:[Steel] Steel; |