| PC220LC-3 Slew Motor 706-75-11302 | B:22 mm; Min operating temperature, Tmin:-40 °C; Rolling Element:Ball Bearing; Da max:102 mm; Characteristic rolling element frequency, BSF:5.26 Hz; Fatigue limit load, Cu:1.64 kN; Characteristic inner ring frequency, BPFI:5.92 Hz; d:60 mm; Enclosure:2 Metal Shields; Brand:NTN; |
| PC60U-5 Slew Motor 706-73-10901 | B:22 mm; Min operating temperature, Tmin:-40 °C; Rolling Element:Ball Bearing; Da max:102 mm; Characteristic rolling element frequency, BSF:5.26 Hz; Fatigue limit load, Cu:1.64 kN; Characteristic inner ring frequency, BPFI:5.92 Hz; d:60 mm; Enclosure:2 Metal Shields; Brand:NTN; |
| PC130-6 Slew Motor 706-73-01161 | Bearing Retained:Yes (with retaining; RoHS:6; Shape:Bottom Mount; Height H(mm):25 ～ 40; Bearing Part Number:6001; Type:Bearings with Housin; Number of Bearings:Single; Housing Material:1045 Carbon Steel; |
| PC40MRX-1 Slew Motor 708-7R-00250 | Z:47.3 mm; T min.:-20 °C; J:104.2 mm; A:36.5 mm; G:M6x1; Designation of housing:PLE205N-; H1:12.8 mm; C0:7.88 kN; A1:24.5 mm; N1:17 mm; |
| PC100-6 Slew Motor 706-73-01180 | T max.:200 °C; A2:35.7 mm; A1:13 mm; S:14.3 mm; L:68 mm; Dz:60 mm; H:130 mm; C:14 kN; Designation of closed end cover:SCC205; Z:39.6 mm; |
| PC45MRX-1 Slew Motor 708-7R-00131 | Flange Shape:Square Type; Volume Discount:Available; Seals:DD (Contact Rubber S; Shape:Flange Type; RoHS:6; Bearing Retained:No; Bearing Part Number:606; Bearing Used:Deep Groove Ball Bea; Bearing Material:[Steel] Steel; |
| PC55MR-3 Slew Motor 708-7R-00420 | Shaft:Provided; Allowable Rotational Speed(rpm):9800; Thread Size on Cam Follower (M)(mm):M12; Roller Lining:None; Volume Discount:Available; Basic Load Rating Cr (Dynamic)(kN):7.87; B:14; Seals:Provided; |
| PC28UU-2 Slew Motor 708-7S-00012 | Bearing Used:Deep Groove Ball Bea; Seals:VV (Non-Contact Rubb; Housing Material:1045 Carbon Steel; C Chamfered:Not Provided; Bearing Part Number:698; Bearing Material:[Steel] Steel; Shape:T-Shaped; Height H(mm):20 ～ 30; RoHS:6; |
| PC120-6 Slew Motor 706-73-01181 | Bearing Retained:Yes (with retaining; RoHS:6; Shape:Bottom Mount; Height H(mm):25 ～ 40; Bearing Part Number:6001; Type:Bearings with Housin; Number of Bearings:Single; Housing Material:1045 Carbon Steel; |
| PC60U-5 Slew Motor 706-73-10901 | T max.:200 °C; A2:35.7 mm; A1:13 mm; S:14.3 mm; L:68 mm; Dz:60 mm; H:130 mm; C:14 kN; Designation of closed end cover:SCC205; Z:39.6 mm; |