PC200LC-8 Slew Motor 706-7G-01041	Shaft:Provided; Allowable Rotational Speed(rpm):9800; Thread Size on Cam Follower (M)(mm):M12; Roller Lining:None; Volume Discount:Available; Basic Load Rating Cr (Dynamic)(kN):7.87; B:14; Seals:Provided;
PC200LC-8E0 Slew Motor 7875-13-1002	Shape:Flange Type; Flange O.D. H(φ):41; Number of Bearings:Double; RoHS:6; Width T(mm):30; Volume Discount:Available; Type:Bearings with Housin; Seals:VV (Non-Contact Rubb;
PC200-3 Slew Motor 706-75-11304	L:161.5 mm; N1:24.5 mm; Z:52.7 mm; N:14mm; Designation of bearing:UC206-19G2T04; T max.:100 °C; Designation of open end cover:SCOU206-19; J:119 mm; B:38.1 mm; C:19.5 kN;
PC60U-5 Slew Motor 706-73-10901	B:22 mm; Min operating temperature, Tmin:-40 °C; Rolling Element:Ball Bearing; Da max:102 mm; Characteristic rolling element frequency, BSF:5.26 Hz; Fatigue limit load, Cu:1.64 kN; Characteristic inner ring frequency, BPFI:5.92 Hz; d:60 mm; Enclosure:2 Metal Shields; Brand:NTN;
PC27R-8 Slew Motor 708-7R-00511	L:161.5 mm; N1:24.5 mm; Z:52.7 mm; N:14mm; Designation of bearing:UC206-19G2T04; T max.:100 °C; Designation of open end cover:SCOU206-19; J:119 mm; B:38.1 mm; C:19.5 kN;
PC220LC-3 Slew Motor 706-75-11300	T max.:200 °C; A2:35.7 mm; A1:13 mm; S:14.3 mm; L:68 mm; Dz:60 mm; H:130 mm; C:14 kN; Designation of closed end cover:SCC205; Z:39.6 mm;
PC100-3 Slew Motor 706-73-10500	Characteristic rolling element frequency, BSF:4.15 Hz; Characteristic outer ring frequency, BPF0:3.09 Hz; Outside Diameter:6.693 Inch | 170 Mil; UNSPSC:31171504; Nlim (grease):4,000 rpm; Long Description:80MM Bore; 170MM Out; f0:13.3; rs min:2.1 mm; Minimum Buy Quantity:N/A; ra max:2 mm;
PC200-6 Slew Motor 706-75-01101	Flange Shape:Square Type; Volume Discount:Available; Seals:DD (Contact Rubber S; Shape:Flange Type; RoHS:6; Bearing Retained:No; Bearing Part Number:606; Bearing Used:Deep Groove Ball Bea; Bearing Material:[Steel] Steel;
PC200LC-3 Slew Motor 706-75-11302	Shaft:Provided; Allowable Rotational Speed(rpm):9800; Thread Size on Cam Follower (M)(mm):M12; Roller Lining:None; Volume Discount:Available; Basic Load Rating Cr (Dynamic)(kN):7.87; B:14; Seals:Provided;
PC200LC-2 Slew Motor 706-75-11001	B:22 mm; Min operating temperature, Tmin:-40 °C; Rolling Element:Ball Bearing; Da max:102 mm; Characteristic rolling element frequency, BSF:5.26 Hz; Fatigue limit load, Cu:1.64 kN; Characteristic inner ring frequency, BPFI:5.92 Hz; d:60 mm; Enclosure:2 Metal Shields; Brand:NTN;