PC200LC-6 Slew Motor 706-75-01170	Bearing Retained:Yes (with retaining; RoHS:6; Shape:Bottom Mount; Height H(mm):25 ～ 40; Bearing Part Number:6001; Type:Bearings with Housin; Number of Bearings:Single; Housing Material:1045 Carbon Steel;
PC100-6 Slew Motor 706-73-01181	Shaft:Provided; Allowable Rotational Speed(rpm):9800; Thread Size on Cam Follower (M)(mm):M12; Roller Lining:None; Volume Discount:Available; Basic Load Rating Cr (Dynamic)(kN):7.87; B:14; Seals:Provided;
PC75UU-1 Slew Motor 706-73-01060	Characteristic rolling element frequency, BSF:4.15 Hz; Characteristic outer ring frequency, BPF0:3.09 Hz; Outside Diameter:6.693 Inch | 170 Mil; UNSPSC:31171504; Nlim (grease):4,000 rpm; Long Description:80MM Bore; 170MM Out; f0:13.3; rs min:2.1 mm; Minimum Buy Quantity:N/A; ra max:2 mm;
PC200CA-6 USA Slew Motor 706-75-01150	T max.:200 °C; A2:35.7 mm; A1:13 mm; S:14.3 mm; L:68 mm; Dz:60 mm; H:130 mm; C:14 kN; Designation of closed end cover:SCC205; Z:39.6 mm;
PC220-3 Slew Motor 706-75-11903	Bearing Used:Deep Groove Ball Bea; Seals:VV (Non-Contact Rubb; Housing Material:1045 Carbon Steel; C Chamfered:Not Provided; Bearing Part Number:698; Bearing Material:[Steel] Steel; Shape:T-Shaped; Height H(mm):20 ～ 30; RoHS:6;
PC160LC-8 Slew Motor KBB0440-85018	A1:11 mm; Weight:0.65 kg; L:86 mm; A:25.5 mm; Designation of bearing:EX203G2L4; S:17 mm; T max.:100 °C; G:M6x1; J:64 mm; B1:43.5 mm;
PC200CA-6 USA Slew Motor 706-75-01150	B:22 mm; Min operating temperature, Tmin:-40 °C; Rolling Element:Ball Bearing; Da max:102 mm; Characteristic rolling element frequency, BSF:5.26 Hz; Fatigue limit load, Cu:1.64 kN; Characteristic inner ring frequency, BPFI:5.92 Hz; d:60 mm; Enclosure:2 Metal Shields; Brand:NTN;
PC158US-2 Slew Motor 706-73-01290	da min:104 mm; Brand:SNR; rs min:3 mm; k:5 mm; d2:110.1 mm; e:0.33; Y1:2.06; Da max:176 mm; Min operating temperature, Tmin:-40 °C; Associated sleeve reference:H2318;
PC120-6 Slew Motor 706-73-01181	Shaft:Provided; Allowable Rotational Speed(rpm):9800; Thread Size on Cam Follower (M)(mm):M12; Roller Lining:None; Volume Discount:Available; Basic Load Rating Cr (Dynamic)(kN):7.87; B:14; Seals:Provided;
PC120-6 Slew Motor 706-73-01180	Z:47.3 mm; T min.:-20 °C; J:104.2 mm; A:36.5 mm; G:M6x1; Designation of housing:PLE205N-; H1:12.8 mm; C0:7.88 kN; A1:24.5 mm; N1:17 mm;