| PC25R-8 Slew Motor 708-7R-00512 | Z:47.3 mm; T min.:-20 °C; J:104.2 mm; A:36.5 mm; G:M6x1; Designation of housing:PLE205N-; H1:12.8 mm; C0:7.88 kN; A1:24.5 mm; N1:17 mm; |
| PC200LC-8 Slew Motor 706-7G-01170 | L:161.5 mm; N1:24.5 mm; Z:52.7 mm; N:14mm; Designation of bearing:UC206-19G2T04; T max.:100 °C; Designation of open end cover:SCOU206-19; J:119 mm; B:38.1 mm; C:19.5 kN; |
| PC75UU-1 Slew Motor 706-73-01060 | Characteristic rolling element frequency, BSF:4.15 Hz; Characteristic outer ring frequency, BPF0:3.09 Hz; Outside Diameter:6.693 Inch | 170 Mil; UNSPSC:31171504; Nlim (grease):4,000 rpm; Long Description:80MM Bore; 170MM Out; f0:13.3; rs min:2.1 mm; Minimum Buy Quantity:N/A; ra max:2 mm; |
| PC200-3 Slew Motor 706-75-11901 | L:161.5 mm; N1:24.5 mm; Z:52.7 mm; N:14mm; Designation of bearing:UC206-19G2T04; T max.:100 °C; Designation of open end cover:SCOU206-19; J:119 mm; B:38.1 mm; C:19.5 kN; |
| PC75UU-3 Slew Motor 708-7T-00410 | Z:47.3 mm; T min.:-20 °C; J:104.2 mm; A:36.5 mm; G:M6x1; Designation of housing:PLE205N-; H1:12.8 mm; C0:7.88 kN; A1:24.5 mm; N1:17 mm; |
| PC100-6 Slew Motor 706-73-01180 | B:22 mm; Min operating temperature, Tmin:-40 °C; Rolling Element:Ball Bearing; Da max:102 mm; Characteristic rolling element frequency, BSF:5.26 Hz; Fatigue limit load, Cu:1.64 kN; Characteristic inner ring frequency, BPFI:5.92 Hz; d:60 mm; Enclosure:2 Metal Shields; Brand:NTN; |
| PC50UU-2 Slew Motor 708-7T-00150 | da min:104 mm; Brand:SNR; rs min:3 mm; k:5 mm; d2:110.1 mm; e:0.33; Y1:2.06; Da max:176 mm; Min operating temperature, Tmin:-40 °C; Associated sleeve reference:H2318; |
| PC200LC-3 Slew Motor 706-75-11900 | B:22 mm; Min operating temperature, Tmin:-40 °C; Rolling Element:Ball Bearing; Da max:102 mm; Characteristic rolling element frequency, BSF:5.26 Hz; Fatigue limit load, Cu:1.64 kN; Characteristic inner ring frequency, BPFI:5.92 Hz; d:60 mm; Enclosure:2 Metal Shields; Brand:NTN; |
| PC120-6 Slew Motor 706-73-01161 | da min:104 mm; Brand:SNR; rs min:3 mm; k:5 mm; d2:110.1 mm; e:0.33; Y1:2.06; Da max:176 mm; Min operating temperature, Tmin:-40 °C; Associated sleeve reference:H2318; |
| PC210LC-6LC Slew Motor 706-75-01101 | Shaft:Provided; Allowable Rotational Speed(rpm):9800; Thread Size on Cam Follower (M)(mm):M12; Roller Lining:None; Volume Discount:Available; Basic Load Rating Cr (Dynamic)(kN):7.87; B:14; Seals:Provided; |