| PC220LC-5 Slew Motor 706-75-01081 | Characteristic rolling element frequency, BSF:4.15 Hz; Characteristic outer ring frequency, BPF0:3.09 Hz; Outside Diameter:6.693 Inch | 170 Mil; UNSPSC:31171504; Nlim (grease):4,000 rpm; Long Description:80MM Bore; 170MM Out; f0:13.3; rs min:2.1 mm; Minimum Buy Quantity:N/A; ra max:2 mm; |
| PC27MR-3 Slew Motor 708-7R-00380 | Flange Shape:Square Type; Volume Discount:Available; Seals:DD (Contact Rubber S; Shape:Flange Type; RoHS:6; Bearing Retained:No; Bearing Part Number:606; Bearing Used:Deep Groove Ball Bea; Bearing Material:[Steel] Steel; |
| PC200LC-6LE Slew Motor 706-75-01150 | Characteristic rolling element frequency, BSF:4.15 Hz; Characteristic outer ring frequency, BPF0:3.09 Hz; Outside Diameter:6.693 Inch | 170 Mil; UNSPSC:31171504; Nlim (grease):4,000 rpm; Long Description:80MM Bore; 170MM Out; f0:13.3; rs min:2.1 mm; Minimum Buy Quantity:N/A; ra max:2 mm; |
| PC40MR-1 Slew Motor 708-7R-00131 | Shaft:Provided; Allowable Rotational Speed(rpm):9800; Thread Size on Cam Follower (M)(mm):M12; Roller Lining:None; Volume Discount:Available; Basic Load Rating Cr (Dynamic)(kN):7.87; B:14; Seals:Provided; |
| PC27MRX-1 Slew Motor 708-7R-00081 | da min:104 mm; Brand:SNR; rs min:3 mm; k:5 mm; d2:110.1 mm; e:0.33; Y1:2.06; Da max:176 mm; Min operating temperature, Tmin:-40 °C; Associated sleeve reference:H2318; |
| PC35MRX-1A Slew Motor 708-7R-00141 | Characteristic rolling element frequency, BSF:4.15 Hz; Characteristic outer ring frequency, BPF0:3.09 Hz; Outside Diameter:6.693 Inch | 170 Mil; UNSPSC:31171504; Nlim (grease):4,000 rpm; Long Description:80MM Bore; 170MM Out; f0:13.3; rs min:2.1 mm; Minimum Buy Quantity:N/A; ra max:2 mm; |
| PC200CA-6 USA Slew Motor 706-75-01150 | B:22 mm; Min operating temperature, Tmin:-40 °C; Rolling Element:Ball Bearing; Da max:102 mm; Characteristic rolling element frequency, BSF:5.26 Hz; Fatigue limit load, Cu:1.64 kN; Characteristic inner ring frequency, BPFI:5.92 Hz; d:60 mm; Enclosure:2 Metal Shields; Brand:NTN; |
| PC200LC-3 Slew Motor 706-75-11301 | Bearing Retained:Yes (with retaining; RoHS:6; Shape:Bottom Mount; Height H(mm):25 ～ 40; Bearing Part Number:6001; Type:Bearings with Housin; Number of Bearings:Single; Housing Material:1045 Carbon Steel; |
| PC200-3 Slew Motor 706-75-11900 | Characteristic rolling element frequency, BSF:4.15 Hz; Characteristic outer ring frequency, BPF0:3.09 Hz; Outside Diameter:6.693 Inch | 170 Mil; UNSPSC:31171504; Nlim (grease):4,000 rpm; Long Description:80MM Bore; 170MM Out; f0:13.3; rs min:2.1 mm; Minimum Buy Quantity:N/A; ra max:2 mm; |
| PC100-6 Slew Motor 706-73-01181 | Shaft:Provided; Allowable Rotational Speed(rpm):9800; Thread Size on Cam Follower (M)(mm):M12; Roller Lining:None; Volume Discount:Available; Basic Load Rating Cr (Dynamic)(kN):7.87; B:14; Seals:Provided; |