| PC160LC-7 Slew Motor KBB0440-85018 | Z:47.3 mm; T min.:-20 °C; J:104.2 mm; A:36.5 mm; G:M6x1; Designation of housing:PLE205N-; H1:12.8 mm; C0:7.88 kN; A1:24.5 mm; N1:17 mm; |
| PC200LC-2 Slew Motor 706-75-11001 | Z:47.3 mm; T min.:-20 °C; J:104.2 mm; A:36.5 mm; G:M6x1; Designation of housing:PLE205N-; H1:12.8 mm; C0:7.88 kN; A1:24.5 mm; N1:17 mm; |
| PC220-6 Slew Motor 706-75-01170 | A1:11 mm; Weight:0.65 kg; L:86 mm; A:25.5 mm; Designation of bearing:EX203G2L4; S:17 mm; T max.:100 °C; G:M6x1; J:64 mm; B1:43.5 mm; |
| PC200-6LC Slew Motor 706-75-01101 | Characteristic rolling element frequency, BSF:4.15 Hz; Characteristic outer ring frequency, BPF0:3.09 Hz; Outside Diameter:6.693 Inch | 170 Mil; UNSPSC:31171504; Nlim (grease):4,000 rpm; Long Description:80MM Bore; 170MM Out; f0:13.3; rs min:2.1 mm; Minimum Buy Quantity:N/A; ra max:2 mm; |
| PC40-6 Slew Motor 708-7T-00040 | Bearing Used:Deep Groove Ball Bea; Seals:VV (Non-Contact Rubb; Housing Material:1045 Carbon Steel; C Chamfered:Not Provided; Bearing Part Number:698; Bearing Material:[Steel] Steel; Shape:T-Shaped; Height H(mm):20 ～ 30; RoHS:6; |
| PC200LC-3 Slew Motor 706-75-11301 | Bearing Retained:Yes (with retaining; RoHS:6; Shape:Bottom Mount; Height H(mm):25 ～ 40; Bearing Part Number:6001; Type:Bearings with Housin; Number of Bearings:Single; Housing Material:1045 Carbon Steel; |
| PC138USLC-8 Slew Motor 706-7C-01032 | A1:11 mm; Weight:0.65 kg; L:86 mm; A:25.5 mm; Designation of bearing:EX203G2L4; S:17 mm; T max.:100 °C; G:M6x1; J:64 mm; B1:43.5 mm; |
| PC200LC-3 Slew Motor 706-75-11900 | B:22 mm; Min operating temperature, Tmin:-40 °C; Rolling Element:Ball Bearing; Da max:102 mm; Characteristic rolling element frequency, BSF:5.26 Hz; Fatigue limit load, Cu:1.64 kN; Characteristic inner ring frequency, BPFI:5.92 Hz; d:60 mm; Enclosure:2 Metal Shields; Brand:NTN; |
| PC138USLC-2 Slew Motor 706-73-01241 | Shape:Flange Type; Flange O.D. H(φ):41; Number of Bearings:Double; RoHS:6; Width T(mm):30; Volume Discount:Available; Type:Bearings with Housin; Seals:VV (Non-Contact Rubb; |
| PC220-3 Slew Motor 706-75-11902 | T max.:200 °C; A2:35.7 mm; A1:13 mm; S:14.3 mm; L:68 mm; Dz:60 mm; H:130 mm; C:14 kN; Designation of closed end cover:SCC205; Z:39.6 mm; |