PC120-6 Slew Motor 706-73-01180	Z:47.3 mm; T min.:-20 °C; J:104.2 mm; A:36.5 mm; G:M6x1; Designation of housing:PLE205N-; H1:12.8 mm; C0:7.88 kN; A1:24.5 mm; N1:17 mm;
PC120-5Z Slew Motor 706-73-01071	T max.:200 °C; A2:35.7 mm; A1:13 mm; S:14.3 mm; L:68 mm; Dz:60 mm; H:130 mm; C:14 kN; Designation of closed end cover:SCC205; Z:39.6 mm;
PC150LC-3 Slew Motor 706-75-14000	A1:11 mm; Weight:0.65 kg; L:86 mm; A:25.5 mm; Designation of bearing:EX203G2L4; S:17 mm; T max.:100 °C; G:M6x1; J:64 mm; B1:43.5 mm;
PC138US-2 Slew Motor 706-73-01241	T max.:200 °C; A2:35.7 mm; A1:13 mm; S:14.3 mm; L:68 mm; Dz:60 mm; H:130 mm; C:14 kN; Designation of closed end cover:SCC205; Z:39.6 mm;
PC200LC-6 Slew Motor 706-75-01170	Unit, Type:Insert Bearing Unit; Basic Load Rating, Dynamic Rating(N):113000; Fit:J7; Unit Body Material:Cast Iron; RoHS:6; Grease Type:Standard Grease; Accessory:With steel plate cov; Machining:No; Stroke:No;
PC160LC-8 Slew Motor KBB0440-85018	T max.:200 °C; A2:35.7 mm; A1:13 mm; S:14.3 mm; L:68 mm; Dz:60 mm; H:130 mm; C:14 kN; Designation of closed end cover:SCC205; Z:39.6 mm;
PC35MRX-1A Slew Motor 708-7R-00141	T max.:200 °C; A2:35.7 mm; A1:13 mm; S:14.3 mm; L:68 mm; Dz:60 mm; H:130 mm; C:14 kN; Designation of closed end cover:SCC205; Z:39.6 mm;
PC60L-5 Slew Motor 706-73-10901	da min:104 mm; Brand:SNR; rs min:3 mm; k:5 mm; d2:110.1 mm; e:0.33; Y1:2.06; Da max:176 mm; Min operating temperature, Tmin:-40 °C; Associated sleeve reference:H2318;
PC200-5 Slew Motor 706-75-01081	L:161.5 mm; N1:24.5 mm; Z:52.7 mm; N:14mm; Designation of bearing:UC206-19G2T04; T max.:100 °C; Designation of open end cover:SCOU206-19; J:119 mm; B:38.1 mm; C:19.5 kN;
PC220-3 Slew Motor 706-75-11302	Characteristic rolling element frequency, BSF:4.15 Hz; Characteristic outer ring frequency, BPF0:3.09 Hz; Outside Diameter:6.693 Inch | 170 Mil; UNSPSC:31171504; Nlim (grease):4,000 rpm; Long Description:80MM Bore; 170MM Out; f0:13.3; rs min:2.1 mm; Minimum Buy Quantity:N/A; ra max:2 mm;