Seal Kit 707-99-75410 Komatsu Wheel Loaders	s1:26.85 mm; A:79.4 mm; T min.:-20 °C; A1:50.8 mm; G:M6x1; Designation of housing:PLE212N-; N1:29.1 mm; C0:32.8 kN; Recommended tightening torque for set screw:16.8 Nm; Designation of open end cover:SCOU212-39;
Seal Kit 707-99-32110 Komatsu Wheel Loaders	D1:355.3 mm; ra max:3 mm; Mass:64.72 kg; d:240 mm; Radial clearance class:C3; Characteristic outer ring frequency, BPF0:9.58 Hz; e:0.29; Characteristic rolling element frequency, BSF:7.46 Hz; Da max:383 mm; Min operating temperature, Tmin:-40 °C;
Seal Kit 707-99-32100 Komatsu Wheel Loaders	N:13mm; Designation of housing:P204-; C:12.8 kN; G:M6x1; S:12.7 mm; Weight:0.68 kg; H2:65 mm; C0:6.65 kN; B:31 mm; T max.:200 °C;
Seal Kit 707-99-43540 Komatsu Wheel Loaders	N:13mm; Designation of housing:P204-; C:12.8 kN; G:M6x1; S:12.7 mm; Weight:0.68 kg; H2:65 mm; C0:6.65 kN; B:31 mm; T max.:200 °C;
Seal Kit 707-99-34500 Komatsu Wheel Loaders	Recommended tightening torque for set screw:5.5 Nm; S:17 mm; B1:43.5 mm; T min.:-40 °C; L:126.5 mm; N:11mm; H2:63.7 mm; B:34 mm; C0:6.65 kN; d:15 mm;
Seal Kit 707-99-14200 Komatsu Wheel Loaders	Bearing Retained:Yes (with retaining; Flange O.D. H(φ):54; RoHS:6; Holder Surface Treatment:Clear Anodize; Bearing Used:Deep Groove Ball Bea; Width T(mm):14; Bearing Part Number:6200; Shape:Flange Type; Number of Bearings:Single;
Seal Kit 707-99-43500 Komatsu Wheel Loaders	Bearing Unit, Type:Pillow Type; Seal:Silicone; Surface Treatment:No; Diameter series symbol:For Heavy Load; Machining:No; Bearing Inner Dia. Shape:Cylindrical Bore Set; Days to Ship:8 Days; Accessory:With cast iron cover; Unit Body Material:Cast Iron; Unit, Type:Insert Bearing Unit;
Seal Kit 707-99-14200 Komatsu Wheel Loaders	s1:26.85 mm; A:79.4 mm; T min.:-20 °C; A1:50.8 mm; G:M6x1; Designation of housing:PLE212N-; N1:29.1 mm; C0:32.8 kN; Recommended tightening torque for set screw:16.8 Nm; Designation of open end cover:SCOU212-39;
Seal Kit 70799-66210 Komatsu Wheel Loaders	Number of Bearings:Double; Bearing Part Number:6006; Shape:Flange Type; Bearing Material:[Steel] Steel; Bearing Used:Deep Groove Ball Bea; Flange Shape:Round Type; Bearing Retained:Yes (with retaining; Width T(mm):45 ～ 80;
Seal Kit 707-99-32110 Komatsu Wheel Loaders	da min:103 mm; Fatigue limit load, Cu:4.1 kN; Static load, C0:107 kN; B:43 mm; Brand:SNR; Characteristic inner ring frequency, BPFI:4.91 Hz; Radial clearance class:C3; Dynamic load, C:142 kN; Characteristic outer ring frequency, BPF0:3.09 Hz; Mass:5.02 kg;