| Seal Kit 707-99-54100 Komatsu Wheel Loaders | Nlim (grease):2,300 rpm; Cage Material:Steel; Bore:7.48 Inch | 190 Mill; Radial clearance class:C3; Inner Race Width:0 Inch | 0 Millimete; da min:199 mm; UNSPSC:31171504; Mass:4.98 kg; Category:Single Row Ball Bear; Static load, C0:127 kN; |
| Seal Kit 707-99-34100 Komatsu Wheel Loaders | Number of Bearings:Double; Bearing Part Number:6006; Shape:Flange Type; Bearing Material:[Steel] Steel; Bearing Used:Deep Groove Ball Bea; Flange Shape:Round Type; Bearing Retained:Yes (with retaining; Width T(mm):45 ～ 80; |
| Seal Kit 707-99-43500 Komatsu Wheel Loaders | Bearing Retained:Yes (with retaining; Flange O.D. H(φ):54; RoHS:6; Holder Surface Treatment:Clear Anodize; Bearing Used:Deep Groove Ball Bea; Width T(mm):14; Bearing Part Number:6200; Shape:Flange Type; Number of Bearings:Single; |
| Seal Kit 707-99-43540 Komatsu Wheel Loaders | D1:355.3 mm; ra max:3 mm; Mass:64.72 kg; d:240 mm; Radial clearance class:C3; Characteristic outer ring frequency, BPF0:9.58 Hz; e:0.29; Characteristic rolling element frequency, BSF:7.46 Hz; Da max:383 mm; Min operating temperature, Tmin:-40 °C; |
| Seal Kit 707-99-66210 Komatsu Wheel Loaders | s1:26.85 mm; A:79.4 mm; T min.:-20 °C; A1:50.8 mm; G:M6x1; Designation of housing:PLE212N-; N1:29.1 mm; C0:32.8 kN; Recommended tightening torque for set screw:16.8 Nm; Designation of open end cover:SCOU212-39; |
| Seal Kit 707-99-14200 Komatsu Wheel Loaders | Bearing Retained:Yes (with retaining; Flange O.D. H(φ):54; RoHS:6; Holder Surface Treatment:Clear Anodize; Bearing Used:Deep Groove Ball Bea; Width T(mm):14; Bearing Part Number:6200; Shape:Flange Type; Number of Bearings:Single; |
| Seal Kit 707-98-12100 Komatsu Wheel Loaders | N:13mm; Designation of housing:P204-; C:12.8 kN; G:M6x1; S:12.7 mm; Weight:0.68 kg; H2:65 mm; C0:6.65 kN; B:31 mm; T max.:200 °C; |
| Seal Kit 707-99-73010 Komatsu Wheel Loaders | s1:26.85 mm; A:79.4 mm; T min.:-20 °C; A1:50.8 mm; G:M6x1; Designation of housing:PLE212N-; N1:29.1 mm; C0:32.8 kN; Recommended tightening torque for set screw:16.8 Nm; Designation of open end cover:SCOU212-39; |
| Seal Kit 707-98-12080 Komatsu Wheel Loaders | N2:61 mm; T min.:-40 °C; Weight:5.26 kg; S:24.6 mm; Designation of housing:T310-; Recommended tightening torque for set screw:22 Nm; A2:40 mm; s1:46.8 mm; A5:24.6 mm; A:61 mm; |
| Seal Kit 707-99-32100 Komatsu Wheel Loaders | Nlim (grease):2,300 rpm; Cage Material:Steel; Bore:7.48 Inch | 190 Mill; Radial clearance class:C3; Inner Race Width:0 Inch | 0 Millimete; da min:199 mm; UNSPSC:31171504; Mass:4.98 kg; Category:Single Row Ball Bear; Static load, C0:127 kN; |