KOMATSU HOSE 07298-01414	A1:13 mm; C0:20.8 kN; Designation of open end cover:SCOU209-27; J:148.5 mm; Designation of housing:FLE209N-; s1:20.6 mm; e:24 mm; T min.:-20 °C; C:31.85 kN; Dz:95 mm;
KOMATSU HOSE 07124-012A7	Flange O.D. H(φ):77; Bearing Retained:Yes (with retaining; Number of Bearings:Double; Shape:Flange Type; Bearing Material:[Steel] Steel; Type:Bearings with Housin; Housing Material:304 Stainless Steel; Bearing I.D. d(mm):20; Bearing Used:Deep Groove Ball Bea;
KOMATSU HOSE 208-62-53320BF	Surface Treatment:No; Fit:J7; Bearing Inner Dia. Shape:Tapered hole adapter; Stroke:No; Unit Body Material:Cast Iron; Bearing Unit, Type:Pillow Type; B:49.2; Basic Load Rating, Static Rating(N):17800;
KOMATSU HOSE 20Y-977-7260	d:0.2500 in; race material:Bronze; misalignment angle:16 °; radial static load capacity:2,539 lbs; shank thread length:0.750 in; lubrication:Unlubricated; rod end type:Female Threaded with Male Stud; head diameter:0.750 in; shank thread size:1/4 -28 in; head width:0.281 in; thread direction:Right Hand; ball width:0.375 in; grade:Commercial/Industrial; length to ball center:1.312 in; lubrication type:No Fitting;
KOMATSU HOSE 21W-Y14-5071	T max.:200 °C; B1:43.7 mm; B:30.2 mm; e:24 mm; Recommended tightening torque for set screw:8 Nm; d1:62 mm; A:37.5 mm; L:111 mm; G:R1/8"; C:31.85 kN;
KOMATSU HOSE 419-62-33682	B1:62.7 mm; A:31 mm; C0:23.2 kN; T min.:-20 °C; B:49.2 mm; Designation of bearing:EX210-31G2L3; C:35.1 kN; T max.:100 °C; L1:260 mm; SW:3.97 mm;
KOMATSU HOSE 203-62-72140	Flange O.D. H(φ):77; Bearing Retained:Yes (with retaining; Number of Bearings:Double; Shape:Flange Type; Bearing Material:[Steel] Steel; Type:Bearings with Housin; Housing Material:304 Stainless Steel; Bearing I.D. d(mm):20; Bearing Used:Deep Groove Ball Bea;
KOMATSU HOSE 22L-62-32911	J:120 mm; A4:26 mm; T max.:100 °C; s1:24.5 mm; C:29.6 kN; e:11 mm; Z:55.7 mm; Weight:2.18 kg; Designation of closed end cover:SCC208; T min.:-20 °C;
KOMATSU HOSE 22B-62-22720	H2:83 mm; A2:35 mm; B1:43.7 mm; Z:84.4 mm; Designation of closed end cover:SCCE209; N2:49 mm; L:144 mm; s1:33.4 mm; Designation of open end cover:SCOE209-45; H1:102 mm;
KOMATSU HOSE 21W-62-51301	T max.:200 °C; B1:43.7 mm; B:30.2 mm; e:24 mm; Recommended tightening torque for set screw:8 Nm; d1:62 mm; A:37.5 mm; L:111 mm; G:R1/8"; C:31.85 kN;