TTVS TTSP TTC TTCS TTCL thrust BEARINGS T311F Cageless	T min.:-20 °C; d1:110 mm; C0:54.2 kN; G:M12x1,25; Recommended tightening torque for set screw:33 Nm; SW:6 mm; B2:27 mm; D:140 mm; C:33 mm; d:80 mm;
TTVS TTSP TTC TTCS TTCL thrust BEARINGS G-3272-C Pin	Brand:NTN; Nlim (oil):8,300 rpm; Fatigue limit load, Cu:1.05 kN; Max operating temperature, Tmax:120 °C; Dynamic load, C:35 kN; rs min:1.1 mm; Min operating temperature, Tmin:-20 °C; Characteristic inner ring frequency, BPFI:5.91 Hz; f0:14.4; B:20 mm;
TTVS TTSP TTC TTCS TTCL thrust BEARINGS T202 T202W	T min.:-20 °C; d1:110 mm; C0:54.2 kN; G:M12x1,25; Recommended tightening torque for set screw:33 Nm; SW:6 mm; B2:27 mm; D:140 mm; C:33 mm; d:80 mm;
TTVS TTSP TTC TTCS TTCL thrust BEARINGS T10100V Pin	Characteristic rolling element frequency, BSF:4.42 Hz; r1a max:1.5 mm; Fatigue limit load, Cu:8.4 kN; Cb min:5 mm; B:24 mm; Rating life coefficient, A2:1; Da max:53.5 mm; rs min:1.5 mm; T:25.25 mm; Da min:52 mm;
TTVS TTSP TTC TTCS TTCL thrust BEARINGS B-8350-C Machined	Designation of closed end cover:SCC210; Z:59.8 mm; S:19 mm; A4:28 mm; A1:14 mm; J:138 mm; A:40 mm; Dz:100 mm; G:M6x1; Recommended tightening torque for set screw:16.8 Nm;
TTVS TTSP TTC TTCS TTCL thrust BEARINGS H-1685-C 241.3	T min.:-20 °C; d1:110 mm; C0:54.2 kN; G:M12x1,25; Recommended tightening torque for set screw:33 Nm; SW:6 mm; B2:27 mm; D:140 mm; C:33 mm; d:80 mm;
TTVS TTSP TTC TTCS TTCL thrust BEARINGS T209 T209W	H2:41 mm; L:264 mm; Designation of housing:SP203-205/47-; Designation of bearing:UC204-12G2L4; L1:225 mm; Recommended tightening torque for set screw:3.7 Nm; H:78 mm; T min.:-20 °C; T max.:100 °C; S:12.7 mm;
TTVS TTSP TTC TTCS TTCL thrust BEARINGS N-2827-G 355.6	H:155 mm; C0:15.2 kN; s1:36.3 mm; Recommended tightening torque for set screw:8 Nm; A2:52.3 mm; Designation of housing:FLE207-; J:130 mm; d:34.92 mm; T max.:200 °C; B1:51.1 mm;
TTVS TTSP TTC TTCS TTCL thrust BEARINGS T7010V Pin	N1:24 mm; s1:24.6 mm; Z:25.5 mm; A1:35 mm; B:49.2 mm; H2:106.4 mm; J:151.5 mm; L:197.5 mm; Recommended tightening torque for set screw:8 Nm; C0:20.8 kN;
TTVS TTSP TTC TTCS TTCL thrust BEARINGS T127 T127W	T min.:-20 °C; d1:110 mm; C0:54.2 kN; G:M12x1,25; Recommended tightening torque for set screw:33 Nm; SW:6 mm; B2:27 mm; D:140 mm; C:33 mm; d:80 mm;