| TTVS TTSP TTC TTCS TTCL thrust BEARINGS N-2827-G 355.6 | H:155 mm; C0:15.2 kN; s1:36.3 mm; Recommended tightening torque for set screw:8 Nm; A2:52.3 mm; Designation of housing:FLE207-; J:130 mm; d:34.92 mm; T max.:200 °C; B1:51.1 mm; |
| TTVS TTSP TTC TTCS TTCL thrust BEARINGS T110 T110W | Characteristic rolling element frequency, BSF:4.42 Hz; r1a max:1.5 mm; Fatigue limit load, Cu:8.4 kN; Cb min:5 mm; B:24 mm; Rating life coefficient, A2:1; Da max:53.5 mm; rs min:1.5 mm; T:25.25 mm; Da min:52 mm; |
| TTVS TTSP TTC TTCS TTCL thrust BEARINGS T188 T188W | T min.:-20 °C; d1:110 mm; C0:54.2 kN; G:M12x1,25; Recommended tightening torque for set screw:33 Nm; SW:6 mm; B2:27 mm; D:140 mm; C:33 mm; d:80 mm; |
| TTVS TTSP TTC TTCS TTCL thrust BEARINGS T202 T202W | T min.:-20 °C; d1:110 mm; C0:54.2 kN; G:M12x1,25; Recommended tightening torque for set screw:33 Nm; SW:6 mm; B2:27 mm; D:140 mm; C:33 mm; d:80 mm; |
| TTVS TTSP TTC TTCS TTCL thrust BEARINGS T110 T110W | B:43.5 mm; d:50 mm; C1:6.5 mm; T max.:100 °C; Weight:0.76 kg; SW:4 mm; D:90 mm; T min.:-20 °C; C:20 mm; Recommended tightening torque for set screw:11.5 Nm; |
| TTVS TTSP TTC TTCS TTCL thrust BEARINGS F-3094-C Machined | Dz:80 mm; C0:15.2 kN; d:35 mm; B:42.9 mm; Designation of bearing:UC207G2L4; L:110 mm; A1:27 mm; H1:13 mm; J:80 mm; T min.:-20 °C; |
| TTVS TTSP TTC TTCS TTCL thrust BEARINGS DX948645 Pin | B:43.5 mm; d:50 mm; C1:6.5 mm; T max.:100 °C; Weight:0.76 kg; SW:4 mm; D:90 mm; T min.:-20 °C; C:20 mm; Recommended tightening torque for set screw:11.5 Nm; |
| TTVS TTSP TTC TTCS TTCL thrust BEARINGS R-2927-C Pin | Dz:80 mm; C0:15.2 kN; d:35 mm; B:42.9 mm; Designation of bearing:UC207G2L4; L:110 mm; A1:27 mm; H1:13 mm; J:80 mm; T min.:-20 °C; |
| TTVS TTSP TTC TTCS TTCL thrust BEARINGS T113 T113W | d:88.9 mm; H2:160 mm; Designation of housing:T318-; A1:32 mm; N2:106 mm; A2:66 mm; L2:32 mm; Weight:21.63 kg; A5:56 mm; S:40 mm; |
| TTVS TTSP TTC TTCS TTCL thrust BEARINGS T142 T142W | Characteristic rolling element frequency, BSF:4.42 Hz; r1a max:1.5 mm; Fatigue limit load, Cu:8.4 kN; Cb min:5 mm; B:24 mm; Rating life coefficient, A2:1; Da max:53.5 mm; rs min:1.5 mm; T:25.25 mm; Da min:52 mm; |