| TTVS TTSP TTC TTCS TTCL thrust BEARINGS T120 B | Dz:80 mm; C0:15.2 kN; d:35 mm; B:42.9 mm; Designation of bearing:UC207G2L4; L:110 mm; A1:27 mm; H1:13 mm; J:80 mm; T min.:-20 °C; |
| TTVS TTSP TTC TTCS TTCL thrust BEARINGS T10100V Pin | Characteristic rolling element frequency, BSF:4.42 Hz; r1a max:1.5 mm; Fatigue limit load, Cu:8.4 kN; Cb min:5 mm; B:24 mm; Rating life coefficient, A2:1; Da max:53.5 mm; rs min:1.5 mm; T:25.25 mm; Da min:52 mm; |
| TTVS TTSP TTC TTCS TTCL thrust BEARINGS T7010V Pin | N1:24 mm; s1:24.6 mm; Z:25.5 mm; A1:35 mm; B:49.2 mm; H2:106.4 mm; J:151.5 mm; L:197.5 mm; Recommended tightening torque for set screw:8 Nm; C0:20.8 kN; |
| TTVS TTSP TTC TTCS TTCL thrust BEARINGS DX948645 Pin | N1:24 mm; s1:24.6 mm; Z:25.5 mm; A1:35 mm; B:49.2 mm; H2:106.4 mm; J:151.5 mm; L:197.5 mm; Recommended tightening torque for set screw:8 Nm; C0:20.8 kN; |
| TTVS TTSP TTC TTCS TTCL thrust BEARINGS DX948645 Pin | B:43.5 mm; d:50 mm; C1:6.5 mm; T max.:100 °C; Weight:0.76 kg; SW:4 mm; D:90 mm; T min.:-20 °C; C:20 mm; Recommended tightening torque for set screw:11.5 Nm; |
| TTVS TTSP TTC TTCS TTCL thrust BEARINGS F-3094-C Machined | Dz:80 mm; C0:15.2 kN; d:35 mm; B:42.9 mm; Designation of bearing:UC207G2L4; L:110 mm; A1:27 mm; H1:13 mm; J:80 mm; T min.:-20 °C; |
| TTVS TTSP TTC TTCS TTCL thrust BEARINGS T135 Machined | B:43.5 mm; d:50 mm; C1:6.5 mm; T max.:100 °C; Weight:0.76 kg; SW:4 mm; D:90 mm; T min.:-20 °C; C:20 mm; Recommended tightening torque for set screw:11.5 Nm; |
| TTVS TTSP TTC TTCS TTCL thrust BEARINGS T581 A | Width T(mm):35; Days to Ship:8 Days; Number of Bearings:Double; RoHS:6; Bearing Used:Deep Groove Ball Bea; Bearing Retained:No; Flange O.D. H(φ):44; Housing Material:304 Stainless Steel; Volume Discount:Available; |
| TTVS TTSP TTC TTCS TTCL thrust BEARINGS T76 T76W | Dz:80 mm; C0:15.2 kN; d:35 mm; B:42.9 mm; Designation of bearing:UC207G2L4; L:110 mm; A1:27 mm; H1:13 mm; J:80 mm; T min.:-20 °C; |
| TTVS TTSP TTC TTCS TTCL thrust BEARINGS T202 T202W | Precision:Grade 0; Basic Dynamic Load Rating Cr(N):5600; h, Maximum(mm):3.18; Basic Static Load Rating Cor(N):2840; Retaining Ring Size D2 max(mm):36.7; Features:Heat resistant / Ant; Type:Ball; RoHS:6; Holder Material:304 Stainless Steel; |