TTVS TTSP TTC TTCS TTCL thrust BEARINGS T484 A	Width T(mm):35; Days to Ship:8 Days; Number of Bearings:Double; RoHS:6; Bearing Used:Deep Groove Ball Bea; Bearing Retained:No; Flange O.D. H(φ):44; Housing Material:304 Stainless Steel; Volume Discount:Available;
TTVS TTSP TTC TTCS TTCL thrust BEARINGS T107 T107W	d:88.9 mm; H2:160 mm; Designation of housing:T318-; A1:32 mm; N2:106 mm; A2:66 mm; L2:32 mm; Weight:21.63 kg; A5:56 mm; S:40 mm;
TTVS TTSP TTC TTCS TTCL thrust BEARINGS T209 T209W	Characteristic rolling element frequency, BSF:4.42 Hz; r1a max:1.5 mm; Fatigue limit load, Cu:8.4 kN; Cb min:5 mm; B:24 mm; Rating life coefficient, A2:1; Da max:53.5 mm; rs min:1.5 mm; T:25.25 mm; Da min:52 mm;
TTVS TTSP TTC TTCS TTCL thrust BEARINGS B-8350-C Machined	Designation of closed end cover:SCC210; Z:59.8 mm; S:19 mm; A4:28 mm; A1:14 mm; J:138 mm; A:40 mm; Dz:100 mm; G:M6x1; Recommended tightening torque for set screw:16.8 Nm;
TTVS TTSP TTC TTCS TTCL thrust BEARINGS T301 T301W	Brand:NTN; Nlim (oil):8,300 rpm; Fatigue limit load, Cu:1.05 kN; Max operating temperature, Tmax:120 °C; Dynamic load, C:35 kN; rs min:1.1 mm; Min operating temperature, Tmin:-20 °C; Characteristic inner ring frequency, BPFI:5.91 Hz; f0:14.4; B:20 mm;
TTVS TTSP TTC TTCS TTCL thrust BEARINGS T188 T188W	T min.:-20 °C; d1:110 mm; C0:54.2 kN; G:M12x1,25; Recommended tightening torque for set screw:33 Nm; SW:6 mm; B2:27 mm; D:140 mm; C:33 mm; d:80 mm;
TTVS TTSP TTC TTCS TTCL thrust BEARINGS S-4077-C Pin	N1:24 mm; s1:24.6 mm; Z:25.5 mm; A1:35 mm; B:49.2 mm; H2:106.4 mm; J:151.5 mm; L:197.5 mm; Recommended tightening torque for set screw:8 Nm; C0:20.8 kN;
TTVS TTSP TTC TTCS TTCL thrust BEARINGS T177XA SPCL(1)	Static load, C0:93 kN; Nlim (oil):7,400 rpm; Dynamic load, C:82.5 kN; Inventory:0.0; Category:Bearings; Manufacturer Name:NTN; Weight / Kilogram:0.084; B:21 mm; da min:61.5 mm; Brand:NTN;
TTVS TTSP TTC TTCS TTCL thrust BEARINGS T127 T127W	N1:24 mm; s1:24.6 mm; Z:25.5 mm; A1:35 mm; B:49.2 mm; H2:106.4 mm; J:151.5 mm; L:197.5 mm; Recommended tightening torque for set screw:8 Nm; C0:20.8 kN;
TTVS TTSP TTC TTCS TTCL thrust BEARINGS S-4055-C Machined	T min.:-20 °C; d1:110 mm; C0:54.2 kN; G:M12x1,25; Recommended tightening torque for set screw:33 Nm; SW:6 mm; B2:27 mm; D:140 mm; C:33 mm; d:80 mm;