TTVS TTSP TTC TTCS TTCL thrust BEARINGS DX948645 Pin | N1:24 mm; s1:24.6 mm; Z:25.5 mm; A1:35 mm; B:49.2 mm; H2:106.4 mm; J:151.5 mm; L:197.5 mm; Recommended tightening torque for set screw:8 Nm; C0:20.8 kN; |
TTVS TTSP TTC TTCS TTCL thrust BEARINGS T163X T163XW | Width T(mm):35; Days to Ship:8 Days; Number of Bearings:Double; RoHS:6; Bearing Used:Deep Groove Ball Bea; Bearing Retained:No; Flange O.D. H(φ):44; Housing Material:304 Stainless Steel; Volume Discount:Available; |
TTVS TTSP TTC TTCS TTCL thrust BEARINGS S-4077-C Pin | N1:24 mm; s1:24.6 mm; Z:25.5 mm; A1:35 mm; B:49.2 mm; H2:106.4 mm; J:151.5 mm; L:197.5 mm; Recommended tightening torque for set screw:8 Nm; C0:20.8 kN; |
TTVS TTSP TTC TTCS TTCL thrust BEARINGS T76 T76W | Dz:80 mm; C0:15.2 kN; d:35 mm; B:42.9 mm; Designation of bearing:UC207G2L4; L:110 mm; A1:27 mm; H1:13 mm; J:80 mm; T min.:-20 °C; |
TTVS TTSP TTC TTCS TTCL thrust BEARINGS D-2864-C Pin | Dz:80 mm; C0:15.2 kN; d:35 mm; B:42.9 mm; Designation of bearing:UC207G2L4; L:110 mm; A1:27 mm; H1:13 mm; J:80 mm; T min.:-20 °C; |
TTVS TTSP TTC TTCS TTCL thrust BEARINGS T177S E | Static load, C0:93 kN; Nlim (oil):7,400 rpm; Dynamic load, C:82.5 kN; Inventory:0.0; Category:Bearings; Manufacturer Name:NTN; Weight / Kilogram:0.084; B:21 mm; da min:61.5 mm; Brand:NTN; |
TTVS TTSP TTC TTCS TTCL thrust BEARINGS T101X A | N1:24 mm; s1:24.6 mm; Z:25.5 mm; A1:35 mm; B:49.2 mm; H2:106.4 mm; J:151.5 mm; L:197.5 mm; Recommended tightening torque for set screw:8 Nm; C0:20.8 kN; |
TTVS TTSP TTC TTCS TTCL thrust BEARINGS T107 T107W | Mass (without HJ ring):3.75 kg; Min operating temperature, Tmin:-20 °C; Static load, C0:323 kN; Characteristic outer ring frequency, BPF0:7.18 Hz; Dynamic load, C:263 kN; dc min:137 mm; Characteristic inner ring frequency, BPFI:9.82 Hz; d1:134.5 mm; da min:116 mm; rs min:2.1 mm; |
TTVS TTSP TTC TTCS TTCL thrust BEARINGS T130 C | d:88.9 mm; H2:160 mm; Designation of housing:T318-; A1:32 mm; N2:106 mm; A2:66 mm; L2:32 mm; Weight:21.63 kg; A5:56 mm; S:40 mm; |
TTVS TTSP TTC TTCS TTCL thrust BEARINGS H-1685-C 241.3 | T min.:-20 °C; d1:110 mm; C0:54.2 kN; G:M12x1,25; Recommended tightening torque for set screw:33 Nm; SW:6 mm; B2:27 mm; D:140 mm; C:33 mm; d:80 mm; |