| TTVS TTSP TTC TTCS TTCL thrust BEARINGS G-3272-C Pin | Brand:NTN; Nlim (oil):8,300 rpm; Fatigue limit load, Cu:1.05 kN; Max operating temperature, Tmax:120 °C; Dynamic load, C:35 kN; rs min:1.1 mm; Min operating temperature, Tmin:-20 °C; Characteristic inner ring frequency, BPFI:5.91 Hz; f0:14.4; B:20 mm; |
| TTVS TTSP TTC TTCS TTCL thrust BEARINGS T114 T114W | H:155 mm; C0:15.2 kN; s1:36.3 mm; Recommended tightening torque for set screw:8 Nm; A2:52.3 mm; Designation of housing:FLE207-; J:130 mm; d:34.92 mm; T max.:200 °C; B1:51.1 mm; |
| TTVS TTSP TTC TTCS TTCL thrust BEARINGS T95 T95W | Width T(mm):35; Days to Ship:8 Days; Number of Bearings:Double; RoHS:6; Bearing Used:Deep Groove Ball Bea; Bearing Retained:No; Flange O.D. H(φ):44; Housing Material:304 Stainless Steel; Volume Discount:Available; |
| TTVS TTSP TTC TTCS TTCL thrust BEARINGS H-1685-C 241.3 | Brand:NTN; Nlim (oil):8,300 rpm; Fatigue limit load, Cu:1.05 kN; Max operating temperature, Tmax:120 °C; Dynamic load, C:35 kN; rs min:1.1 mm; Min operating temperature, Tmin:-20 °C; Characteristic inner ring frequency, BPFI:5.91 Hz; f0:14.4; B:20 mm; |
| TTVS TTSP TTC TTCS TTCL thrust BEARINGS T350 D | T min.:-20 °C; d1:110 mm; C0:54.2 kN; G:M12x1,25; Recommended tightening torque for set screw:33 Nm; SW:6 mm; B2:27 mm; D:140 mm; C:33 mm; d:80 mm; |
| TTVS TTSP TTC TTCS TTCL thrust BEARINGS DX121944 Pin | d:88.9 mm; H2:160 mm; Designation of housing:T318-; A1:32 mm; N2:106 mm; A2:66 mm; L2:32 mm; Weight:21.63 kg; A5:56 mm; S:40 mm; |
| TTVS TTSP TTC TTCS TTCL thrust BEARINGS F-3131-G Pin | T min.:-20 °C; d1:110 mm; C0:54.2 kN; G:M12x1,25; Recommended tightening torque for set screw:33 Nm; SW:6 mm; B2:27 mm; D:140 mm; C:33 mm; d:80 mm; |
| TTVS TTSP TTC TTCS TTCL thrust BEARINGS T110 T110W | B:43.5 mm; d:50 mm; C1:6.5 mm; T max.:100 °C; Weight:0.76 kg; SW:4 mm; D:90 mm; T min.:-20 °C; C:20 mm; Recommended tightening torque for set screw:11.5 Nm; |
| TTVS TTSP TTC TTCS TTCL thrust BEARINGS T600 T600W | B:43.5 mm; d:50 mm; C1:6.5 mm; T max.:100 °C; Weight:0.76 kg; SW:4 mm; D:90 mm; T min.:-20 °C; C:20 mm; Recommended tightening torque for set screw:11.5 Nm; |
| TTVS TTSP TTC TTCS TTCL thrust BEARINGS H-1685-C 241.3 | T min.:-20 °C; d1:110 mm; C0:54.2 kN; G:M12x1,25; Recommended tightening torque for set screw:33 Nm; SW:6 mm; B2:27 mm; D:140 mm; C:33 mm; d:80 mm; |