TTVS TTSP TTC TTCS TTCL thrust BEARINGS T157 T157W	Dz:80 mm; C0:15.2 kN; d:35 mm; B:42.9 mm; Designation of bearing:UC207G2L4; L:110 mm; A1:27 mm; H1:13 mm; J:80 mm; T min.:-20 °C;
TTVS TTSP TTC TTCS TTCL thrust BEARINGS T20751 Polymer	T min.:-20 °C; d1:110 mm; C0:54.2 kN; G:M12x1,25; Recommended tightening torque for set screw:33 Nm; SW:6 mm; B2:27 mm; D:140 mm; C:33 mm; d:80 mm;
TTVS TTSP TTC TTCS TTCL thrust BEARINGS F-3094-C Machined	Dz:80 mm; C0:15.2 kN; d:35 mm; B:42.9 mm; Designation of bearing:UC207G2L4; L:110 mm; A1:27 mm; H1:13 mm; J:80 mm; T min.:-20 °C;
TTVS TTSP TTC TTCS TTCL thrust BEARINGS T691 Machined	H:155 mm; C0:15.2 kN; s1:36.3 mm; Recommended tightening torque for set screw:8 Nm; A2:52.3 mm; Designation of housing:FLE207-; J:130 mm; d:34.92 mm; T max.:200 °C; B1:51.1 mm;
TTVS TTSP TTC TTCS TTCL thrust BEARINGS T105 A	H2:41 mm; L:264 mm; Designation of housing:SP203-205/47-; Designation of bearing:UC204-12G2L4; L1:225 mm; Recommended tightening torque for set screw:3.7 Nm; H:78 mm; T min.:-20 °C; T max.:100 °C; S:12.7 mm;
TTVS TTSP TTC TTCS TTCL thrust BEARINGS DX948645 Pin	N1:24 mm; s1:24.6 mm; Z:25.5 mm; A1:35 mm; B:49.2 mm; H2:106.4 mm; J:151.5 mm; L:197.5 mm; Recommended tightening torque for set screw:8 Nm; C0:20.8 kN;
TTVS TTSP TTC TTCS TTCL thrust BEARINGS T20751 Polymer	Width T(mm):35; Days to Ship:8 Days; Number of Bearings:Double; RoHS:6; Bearing Used:Deep Groove Ball Bea; Bearing Retained:No; Flange O.D. H(φ):44; Housing Material:304 Stainless Steel; Volume Discount:Available;
TTVS TTSP TTC TTCS TTCL thrust BEARINGS G-3272-C Pin	Brand:NTN; Nlim (oil):8,300 rpm; Fatigue limit load, Cu:1.05 kN; Max operating temperature, Tmax:120 °C; Dynamic load, C:35 kN; rs min:1.1 mm; Min operating temperature, Tmin:-20 °C; Characteristic inner ring frequency, BPFI:5.91 Hz; f0:14.4; B:20 mm;
TTVS TTSP TTC TTCS TTCL thrust BEARINGS E-1994-C Pin	Precision:Grade 0; Basic Dynamic Load Rating Cr(N):5600; h, Maximum(mm):3.18; Basic Static Load Rating Cor(N):2840; Retaining Ring Size D2 max(mm):36.7; Features:Heat resistant / Ant; Type:Ball; RoHS:6; Holder Material:304 Stainless Steel;
TTVS TTSP TTC TTCS TTCL thrust BEARINGS T101X A	N1:24 mm; s1:24.6 mm; Z:25.5 mm; A1:35 mm; B:49.2 mm; H2:106.4 mm; J:151.5 mm; L:197.5 mm; Recommended tightening torque for set screw:8 Nm; C0:20.8 kN;