TTVS TTSP TTC TTCS TTCL thrust BEARINGS T311F Cageless	N1:24 mm; s1:24.6 mm; Z:25.5 mm; A1:35 mm; B:49.2 mm; H2:106.4 mm; J:151.5 mm; L:197.5 mm; Recommended tightening torque for set screw:8 Nm; C0:20.8 kN;
TTVS TTSP TTC TTCS TTCL thrust BEARINGS E-2004-C 228.6	Mass (without HJ ring):3.75 kg; Min operating temperature, Tmin:-20 °C; Static load, C0:323 kN; Characteristic outer ring frequency, BPF0:7.18 Hz; Dynamic load, C:263 kN; dc min:137 mm; Characteristic inner ring frequency, BPFI:9.82 Hz; d1:134.5 mm; da min:116 mm; rs min:2.1 mm;
TTVS TTSP TTC TTCS TTCL thrust BEARINGS F-3090-A Pin	T min.:-20 °C; d1:110 mm; C0:54.2 kN; G:M12x1,25; Recommended tightening torque for set screw:33 Nm; SW:6 mm; B2:27 mm; D:140 mm; C:33 mm; d:80 mm;
TTVS TTSP TTC TTCS TTCL thrust BEARINGS T4020 D	Brand:NTN; Nlim (oil):8,300 rpm; Fatigue limit load, Cu:1.05 kN; Max operating temperature, Tmax:120 °C; Dynamic load, C:35 kN; rs min:1.1 mm; Min operating temperature, Tmin:-20 °C; Characteristic inner ring frequency, BPFI:5.91 Hz; f0:14.4; B:20 mm;
TTVS TTSP TTC TTCS TTCL thrust BEARINGS T451 Machined	Static load, C0:93 kN; Nlim (oil):7,400 rpm; Dynamic load, C:82.5 kN; Inventory:0.0; Category:Bearings; Manufacturer Name:NTN; Weight / Kilogram:0.084; B:21 mm; da min:61.5 mm; Brand:NTN;
TTVS TTSP TTC TTCS TTCL thrust BEARINGS T600 T600W	B:43.5 mm; d:50 mm; C1:6.5 mm; T max.:100 °C; Weight:0.76 kg; SW:4 mm; D:90 mm; T min.:-20 °C; C:20 mm; Recommended tightening torque for set screw:11.5 Nm;
TTVS TTSP TTC TTCS TTCL thrust BEARINGS T142 T142W	Characteristic rolling element frequency, BSF:4.42 Hz; r1a max:1.5 mm; Fatigue limit load, Cu:8.4 kN; Cb min:5 mm; B:24 mm; Rating life coefficient, A2:1; Da max:53.5 mm; rs min:1.5 mm; T:25.25 mm; Da min:52 mm;
TTVS TTSP TTC TTCS TTCL thrust BEARINGS T178 C	H2:41 mm; L:264 mm; Designation of housing:SP203-205/47-; Designation of bearing:UC204-12G2L4; L1:225 mm; Recommended tightening torque for set screw:3.7 Nm; H:78 mm; T min.:-20 °C; T max.:100 °C; S:12.7 mm;
TTVS TTSP TTC TTCS TTCL thrust BEARINGS B-8350-C Machined	Mass (without HJ ring):3.75 kg; Min operating temperature, Tmin:-20 °C; Static load, C0:323 kN; Characteristic outer ring frequency, BPF0:7.18 Hz; Dynamic load, C:263 kN; dc min:137 mm; Characteristic inner ring frequency, BPFI:9.82 Hz; d1:134.5 mm; da min:116 mm; rs min:2.1 mm;
TTVS TTSP TTC TTCS TTCL thrust BEARINGS F-3094-C Machined	Dz:80 mm; C0:15.2 kN; d:35 mm; B:42.9 mm; Designation of bearing:UC207G2L4; L:110 mm; A1:27 mm; H1:13 mm; J:80 mm; T min.:-20 °C;