TTVS TTSP TTC TTCS TTCL thrust BEARINGS T178 C	H2:41 mm; L:264 mm; Designation of housing:SP203-205/47-; Designation of bearing:UC204-12G2L4; L1:225 mm; Recommended tightening torque for set screw:3.7 Nm; H:78 mm; T min.:-20 °C; T max.:100 °C; S:12.7 mm;
TTVS TTSP TTC TTCS TTCL thrust BEARINGS T149 T149W	H:155 mm; C0:15.2 kN; s1:36.3 mm; Recommended tightening torque for set screw:8 Nm; A2:52.3 mm; Designation of housing:FLE207-; J:130 mm; d:34.92 mm; T max.:200 °C; B1:51.1 mm;
TTVS TTSP TTC TTCS TTCL thrust BEARINGS T4020 D	Mass (without HJ ring):3.75 kg; Min operating temperature, Tmin:-20 °C; Static load, C0:323 kN; Characteristic outer ring frequency, BPF0:7.18 Hz; Dynamic load, C:263 kN; dc min:137 mm; Characteristic inner ring frequency, BPFI:9.82 Hz; d1:134.5 mm; da min:116 mm; rs min:2.1 mm;
TTVS TTSP TTC TTCS TTCL thrust BEARINGS DX121944 Pin	d:88.9 mm; H2:160 mm; Designation of housing:T318-; A1:32 mm; N2:106 mm; A2:66 mm; L2:32 mm; Weight:21.63 kg; A5:56 mm; S:40 mm;
TTVS TTSP TTC TTCS TTCL thrust BEARINGS T201 T201W	Brand:NTN; Nlim (oil):8,300 rpm; Fatigue limit load, Cu:1.05 kN; Max operating temperature, Tmax:120 °C; Dynamic load, C:35 kN; rs min:1.1 mm; Min operating temperature, Tmin:-20 °C; Characteristic inner ring frequency, BPFI:5.91 Hz; f0:14.4; B:20 mm;
TTVS TTSP TTC TTCS TTCL thrust BEARINGS T105 A	Dz:80 mm; C0:15.2 kN; d:35 mm; B:42.9 mm; Designation of bearing:UC207G2L4; L:110 mm; A1:27 mm; H1:13 mm; J:80 mm; T min.:-20 °C;
TTVS TTSP TTC TTCS TTCL thrust BEARINGS H-1685-C 241.3	T min.:-20 °C; d1:110 mm; C0:54.2 kN; G:M12x1,25; Recommended tightening torque for set screw:33 Nm; SW:6 mm; B2:27 mm; D:140 mm; C:33 mm; d:80 mm;
TTVS TTSP TTC TTCS TTCL thrust BEARINGS T182 T182W	N1:24 mm; s1:24.6 mm; Z:25.5 mm; A1:35 mm; B:49.2 mm; H2:106.4 mm; J:151.5 mm; L:197.5 mm; Recommended tightening torque for set screw:8 Nm; C0:20.8 kN;
TTVS TTSP TTC TTCS TTCL thrust BEARINGS I-2077-C Machined	Precision:Grade 0; Basic Dynamic Load Rating Cr(N):5600; h, Maximum(mm):3.18; Basic Static Load Rating Cor(N):2840; Retaining Ring Size D2 max(mm):36.7; Features:Heat resistant / Ant; Type:Ball; RoHS:6; Holder Material:304 Stainless Steel;
TTVS TTSP TTC TTCS TTCL thrust BEARINGS D-2864-C Pin	Dz:80 mm; C0:15.2 kN; d:35 mm; B:42.9 mm; Designation of bearing:UC207G2L4; L:110 mm; A1:27 mm; H1:13 mm; J:80 mm; T min.:-20 °C;