| TTVS TTSP TTC TTCS TTCL thrust BEARINGS T691 Machined | T min.:-20 °C; d1:110 mm; C0:54.2 kN; G:M12x1,25; Recommended tightening torque for set screw:33 Nm; SW:6 mm; B2:27 mm; D:140 mm; C:33 mm; d:80 mm; |
| TTVS TTSP TTC TTCS TTCL thrust BEARINGS T93 A | Designation of closed end cover:SCC210; Z:59.8 mm; S:19 mm; A4:28 mm; A1:14 mm; J:138 mm; A:40 mm; Dz:100 mm; G:M6x1; Recommended tightening torque for set screw:16.8 Nm; |
| TTVS TTSP TTC TTCS TTCL thrust BEARINGS T127 T127W | T min.:-20 °C; d1:110 mm; C0:54.2 kN; G:M12x1,25; Recommended tightening torque for set screw:33 Nm; SW:6 mm; B2:27 mm; D:140 mm; C:33 mm; d:80 mm; |
| TTVS TTSP TTC TTCS TTCL thrust BEARINGS T101X A | N1:24 mm; s1:24.6 mm; Z:25.5 mm; A1:35 mm; B:49.2 mm; H2:106.4 mm; J:151.5 mm; L:197.5 mm; Recommended tightening torque for set screw:8 Nm; C0:20.8 kN; |
| TTVS TTSP TTC TTCS TTCL thrust BEARINGS W-3218-B Pin | Characteristic rolling element frequency, BSF:4.42 Hz; r1a max:1.5 mm; Fatigue limit load, Cu:8.4 kN; Cb min:5 mm; B:24 mm; Rating life coefficient, A2:1; Da max:53.5 mm; rs min:1.5 mm; T:25.25 mm; Da min:52 mm; |
| TTVS TTSP TTC TTCS TTCL thrust BEARINGS A-6096-C Machined | d:88.9 mm; H2:160 mm; Designation of housing:T318-; A1:32 mm; N2:106 mm; A2:66 mm; L2:32 mm; Weight:21.63 kg; A5:56 mm; S:40 mm; |
| TTVS TTSP TTC TTCS TTCL thrust BEARINGS T511 Machined | B:43.5 mm; d:50 mm; C1:6.5 mm; T max.:100 °C; Weight:0.76 kg; SW:4 mm; D:90 mm; T min.:-20 °C; C:20 mm; Recommended tightening torque for set screw:11.5 Nm; |
| TTVS TTSP TTC TTCS TTCL thrust BEARINGS T4020 D | Mass (without HJ ring):3.75 kg; Min operating temperature, Tmin:-20 °C; Static load, C0:323 kN; Characteristic outer ring frequency, BPF0:7.18 Hz; Dynamic load, C:263 kN; dc min:137 mm; Characteristic inner ring frequency, BPFI:9.82 Hz; d1:134.5 mm; da min:116 mm; rs min:2.1 mm; |
| TTVS TTSP TTC TTCS TTCL thrust BEARINGS T691 Machined | Mass (without HJ ring):3.75 kg; Min operating temperature, Tmin:-20 °C; Static load, C0:323 kN; Characteristic outer ring frequency, BPF0:7.18 Hz; Dynamic load, C:263 kN; dc min:137 mm; Characteristic inner ring frequency, BPFI:9.82 Hz; d1:134.5 mm; da min:116 mm; rs min:2.1 mm; |
| TTVS TTSP TTC TTCS TTCL thrust BEARINGS T142 T142W | H:155 mm; C0:15.2 kN; s1:36.3 mm; Recommended tightening torque for set screw:8 Nm; A2:52.3 mm; Designation of housing:FLE207-; J:130 mm; d:34.92 mm; T max.:200 °C; B1:51.1 mm; |