TTVS TTSP TTC TTCS TTCL thrust BEARINGS N-2827-G 355.6	H:155 mm; C0:15.2 kN; s1:36.3 mm; Recommended tightening torque for set screw:8 Nm; A2:52.3 mm; Designation of housing:FLE207-; J:130 mm; d:34.92 mm; T max.:200 °C; B1:51.1 mm;
TTVS TTSP TTC TTCS TTCL thrust BEARINGS S-4055-C Machined	H2:41 mm; L:264 mm; Designation of housing:SP203-205/47-; Designation of bearing:UC204-12G2L4; L1:225 mm; Recommended tightening torque for set screw:3.7 Nm; H:78 mm; T min.:-20 °C; T max.:100 °C; S:12.7 mm;
TTVS TTSP TTC TTCS TTCL thrust BEARINGS T691 Machined	H:155 mm; C0:15.2 kN; s1:36.3 mm; Recommended tightening torque for set screw:8 Nm; A2:52.3 mm; Designation of housing:FLE207-; J:130 mm; d:34.92 mm; T max.:200 °C; B1:51.1 mm;
TTVS TTSP TTC TTCS TTCL thrust BEARINGS T144XA SPCL(1)	Basic Dynamic Load Rating(N):6100; Type:Ball; Size Standards:Metric System; Max. Allowed rpm(rpm):22000; Days to Ship:9 Days or more; B:10; Load Direction:Radial; RoHS:6; Specifications/Environment:Standard;
TTVS TTSP TTC TTCS TTCL thrust BEARINGS T451 Machined	Static load, C0:93 kN; Nlim (oil):7,400 rpm; Dynamic load, C:82.5 kN; Inventory:0.0; Category:Bearings; Manufacturer Name:NTN; Weight / Kilogram:0.084; B:21 mm; da min:61.5 mm; Brand:NTN;
TTVS TTSP TTC TTCS TTCL thrust BEARINGS T15501 Polymer	T min.:-20 °C; d1:110 mm; C0:54.2 kN; G:M12x1,25; Recommended tightening torque for set screw:33 Nm; SW:6 mm; B2:27 mm; D:140 mm; C:33 mm; d:80 mm;
TTVS TTSP TTC TTCS TTCL thrust BEARINGS D-2864-C Pin	N1:24 mm; s1:24.6 mm; Z:25.5 mm; A1:35 mm; B:49.2 mm; H2:106.4 mm; J:151.5 mm; L:197.5 mm; Recommended tightening torque for set screw:8 Nm; C0:20.8 kN;
TTVS TTSP TTC TTCS TTCL thrust BEARINGS T189 T189W	Width T(mm):35; Days to Ship:8 Days; Number of Bearings:Double; RoHS:6; Bearing Used:Deep Groove Ball Bea; Bearing Retained:No; Flange O.D. H(φ):44; Housing Material:304 Stainless Steel; Volume Discount:Available;
TTVS TTSP TTC TTCS TTCL thrust BEARINGS T182 T182W	H2:41 mm; L:264 mm; Designation of housing:SP203-205/47-; Designation of bearing:UC204-12G2L4; L1:225 mm; Recommended tightening torque for set screw:3.7 Nm; H:78 mm; T min.:-20 °C; T max.:100 °C; S:12.7 mm;
TTVS TTSP TTC TTCS TTCL thrust BEARINGS T101X A	N1:24 mm; s1:24.6 mm; Z:25.5 mm; A1:35 mm; B:49.2 mm; H2:106.4 mm; J:151.5 mm; L:197.5 mm; Recommended tightening torque for set screw:8 Nm; C0:20.8 kN;