| TTVS TTSP TTC TTCS TTCL thrust BEARINGS T20751 Polymer | Basic Dynamic Load Rating(N):6100; Type:Ball; Size Standards:Metric System; Max. Allowed rpm(rpm):22000; Days to Ship:9 Days or more; B:10; Load Direction:Radial; RoHS:6; Specifications/Environment:Standard; |
| TTVS TTSP TTC TTCS TTCL thrust BEARINGS E-1994-C Pin | Precision:Grade 0; Basic Dynamic Load Rating Cr(N):5600; h, Maximum(mm):3.18; Basic Static Load Rating Cor(N):2840; Retaining Ring Size D2 max(mm):36.7; Features:Heat resistant / Ant; Type:Ball; RoHS:6; Holder Material:304 Stainless Steel; |
| TTVS TTSP TTC TTCS TTCL thrust BEARINGS T142 T142W | Characteristic rolling element frequency, BSF:4.42 Hz; r1a max:1.5 mm; Fatigue limit load, Cu:8.4 kN; Cb min:5 mm; B:24 mm; Rating life coefficient, A2:1; Da max:53.5 mm; rs min:1.5 mm; T:25.25 mm; Da min:52 mm; |
| TTVS TTSP TTC TTCS TTCL thrust BEARINGS T114 T114W | Basic Dynamic Load Rating(N):6100; Type:Ball; Size Standards:Metric System; Max. Allowed rpm(rpm):22000; Days to Ship:9 Days or more; B:10; Load Direction:Radial; RoHS:6; Specifications/Environment:Standard; |
| TTVS TTSP TTC TTCS TTCL thrust BEARINGS S-4055-C Machined | T min.:-20 °C; d1:110 mm; C0:54.2 kN; G:M12x1,25; Recommended tightening torque for set screw:33 Nm; SW:6 mm; B2:27 mm; D:140 mm; C:33 mm; d:80 mm; |
| TTVS TTSP TTC TTCS TTCL thrust BEARINGS S-4077-C Pin | N1:24 mm; s1:24.6 mm; Z:25.5 mm; A1:35 mm; B:49.2 mm; H2:106.4 mm; J:151.5 mm; L:197.5 mm; Recommended tightening torque for set screw:8 Nm; C0:20.8 kN; |
| TTVS TTSP TTC TTCS TTCL thrust BEARINGS T350 D | T min.:-20 °C; d1:110 mm; C0:54.2 kN; G:M12x1,25; Recommended tightening torque for set screw:33 Nm; SW:6 mm; B2:27 mm; D:140 mm; C:33 mm; d:80 mm; |
| TTVS TTSP TTC TTCS TTCL thrust BEARINGS T101 T101W | H2:41 mm; L:264 mm; Designation of housing:SP203-205/47-; Designation of bearing:UC204-12G2L4; L1:225 mm; Recommended tightening torque for set screw:3.7 Nm; H:78 mm; T min.:-20 °C; T max.:100 °C; S:12.7 mm; |
| TTVS TTSP TTC TTCS TTCL thrust BEARINGS T101X A | N1:24 mm; s1:24.6 mm; Z:25.5 mm; A1:35 mm; B:49.2 mm; H2:106.4 mm; J:151.5 mm; L:197.5 mm; Recommended tightening torque for set screw:8 Nm; C0:20.8 kN; |
| TTVS TTSP TTC TTCS TTCL thrust BEARINGS T182 T182W | N1:24 mm; s1:24.6 mm; Z:25.5 mm; A1:35 mm; B:49.2 mm; H2:106.4 mm; J:151.5 mm; L:197.5 mm; Recommended tightening torque for set screw:8 Nm; C0:20.8 kN; |