Single row tapered roller bearings 32088

Single row tapered roller bearings 32028X	Width T(mm):14; Shape:Flanged Pilot Type; Housing Material:304 Stainless Steel; Type:Bearings with Housin; Bearing Retained:Yes (with retaining; Volume Discount:Available; Holder Surface Treatment:Not Provided; Bearing Material:[Steel] Steel; RoHS:6; Number of Bearings:Single;
Single row tapered roller bearings 30344	Bearing I.D. d(mm):8; Bearing Part Number:608; Bearing Retained:Yes (with retaining; Shape:Bottom Mount; Bearing Used:Deep Groove Ball Bea; Number of Bearings:Single; Type:Bearings with Housin; Width T(mm):12;
Single row tapered roller bearings 31336	A:48 mm; A1:15 mm; e:17 mm; Recommended tightening torque for set screw:16.8 Nm; T max.:200 °C; B1:77.7 mm; A2:63.8 mm; d1:82 mm; L:195 mm; S:30.9 mm;
Single row tapered roller bearings 31338	Category:Roller Follower; d:6; Volume Discount:Available; Roller Follower Type:With Urethane; Roller Guiding Method:Retainer Type; Shaft:None; Roller Type:Flat Type; RoHS:6;
Single row tapered roller bearings 32940	B:77.8 mm; A1:22 mm; S:33.3 mm; Designation of bearing:UC215-47G2T04; Weight:5.9 kg; C:66 kN; A2:78.5 mm; L:200 mm; C0:49.5 kN; T min.:-40 °C;
Single row tapered roller bearings 32968	Width T(mm):14; Shape:Flanged Pilot Type; Housing Material:304 Stainless Steel; Type:Bearings with Housin; Bearing Retained:Yes (with retaining; Volume Discount:Available; Holder Surface Treatment:Not Provided; Bearing Material:[Steel] Steel; RoHS:6; Number of Bearings:Single;
Single row tapered roller bearings 30326	Raceway Ring Shape:Needle Roller; Revolution Frequency(rpm):9000; Basic Load Rating, Dynamic Rating(N):12000; Series:Heavy Load; Format symbol:HMK; Size Standards:Metric System; Post-assembly heat treatment (pre-bent type):No; Case hardening (outer ring only):No; Outer Ring Type:Flat; Outer Ring:With Outer Ring;
Single row tapered roller bearings 30332	Raceway Ring Shape:Needle Roller; Revolution Frequency(rpm):9000; Basic Load Rating, Dynamic Rating(N):12000; Series:Heavy Load; Format symbol:HMK; Size Standards:Metric System; Post-assembly heat treatment (pre-bent type):No; Case hardening (outer ring only):No; Outer Ring Type:Flat; Outer Ring:With Outer Ring;
Single row tapered roller bearings 31326	Basic Load Rating Cr (Dynamic)(kN):4.17; Category:Cam Followers; Roller Lining:None; D:19; Volume Discount:Available; B:11; Basic Load Rating Cor (Static)(kN):4.65; Shaft:Provided;
Single row tapered roller bearings 32230	Type:Bearings with Housin; Shape:Flange Type; Bearing Material:Stainless Steel; Days to Ship:7 Days; Bearing Used:Deep Groove Ball Bea; Number of Bearings:Double; Bearing I.D. d(mm):12; Seals:ZZ (Double Shield); Bearing Retained:No;

Double row tapered roller bearings

SKF manufactures double row tapered roller bearings in the TDO (fig. 1) and TDI (fig. 2) designs, in many variants and with different features (→ Designs and

Tapered Roller Bearings | The Timken Company

Inch Single Row. Single-row tapered roller bearings are the most basic and widely used, consisting of a cone assembly and a cup. Timken patented the first in

SKF Single row tapered roller bearing metric | ERIKS shop NL

The projection lines of the raceways meet at a common point on the bearing axis to provide true rolling and low friction. Single row tapered roller bearings are

Single Row Tapered Roller Bearings | Single Row TRB - NBC

The correct amount of radial and axial clearance is obtained by adjusting the two bearings against each other. Besides, double row and four row taper roller bearings are also widely used for heavy loads such as rolling mills. A single row taper roller bearing can be located endwise in one direction only