Single row tapered roller bearings 32328

Single row tapered roller bearings 32321	Contact angle(Degree):30; Outer Ring:With Outer Ring; Special Configurations Code:No; Size Standards:Metric System; Combination symbol:No; Symbol of Bearing Ring Shape:No; Inner/Outer Ring Material:[Steel] Steel; Load Direction:Radial; RoHS:6; Seal, Shield Symbols:No;
Single row tapered roller bearings 31336	Shape:Flange Type; Bearing Used:Deep Groove Ball Bea; Bearing Part Number:6201; Flange Shape:Round Type; Number of Bearings:Double; Type:Bearings with Housin; Flange O.D. H(φ):56; Housing Material:304 Stainless Steel; RoHS:6;
Single row tapered roller bearings 30222	Flush Ground:No; Number of Bearings:1 (Single); Raceway Style:Not Applicable; Noun:Bearing; ra max:1 mm; Product Group:B04270; Width:0.591 Inch \| 15 Mill; Bore:0.984 Inch \| 25 Mill; da min:30 mm; Characteristic rolling element frequency, BSF:4.71 Hz;
Single row tapered roller bearings 33124	Type:Bearings with Housin; Shape:Flange Type; Bearing Material:Stainless Steel; Days to Ship:7 Days; Bearing Used:Deep Groove Ball Bea; Number of Bearings:Double; Bearing I.D. d(mm):12; Seals:ZZ (Double Shield); Bearing Retained:No;
Single row tapered roller bearings 31328	Raceway Ring Shape:Needle Roller; Revolution Frequency(rpm):9000; Basic Load Rating, Dynamic Rating(N):12000; Series:Heavy Load; Format symbol:HMK; Size Standards:Metric System; Post-assembly heat treatment (pre-bent type):No; Case hardening (outer ring only):No; Outer Ring Type:Flat; Outer Ring:With Outer Ring;
Single row tapered roller bearings 32221	Basic Load Rating Cr (Dynamic)(kN):4.17; Category:Cam Followers; Roller Lining:None; D:19; Volume Discount:Available; B:11; Basic Load Rating Cor (Static)(kN):4.65; Shaft:Provided;
Single row tapered roller bearings 30326	Flush Ground:No; Number of Bearings:1 (Single); Raceway Style:Not Applicable; Noun:Bearing; ra max:1 mm; Product Group:B04270; Width:0.591 Inch \| 15 Mill; Bore:0.984 Inch \| 25 Mill; da min:30 mm; Characteristic rolling element frequency, BSF:4.71 Hz;
Single row tapered roller bearings 32056X	B:77.8 mm; A1:22 mm; S:33.3 mm; Designation of bearing:UC215-47G2T04; Weight:5.9 kg; C:66 kN; A2:78.5 mm; L:200 mm; C0:49.5 kN; T min.:-40 °C;
Single row tapered roller bearings 33121	Contact angle(Degree):30; Outer Ring:With Outer Ring; Special Configurations Code:No; Size Standards:Metric System; Combination symbol:No; Symbol of Bearing Ring Shape:No; Inner/Outer Ring Material:[Steel] Steel; Load Direction:Radial; RoHS:6; Seal, Shield Symbols:No;
Single row tapered roller bearings 32984	Type:Bearings with Housin; Shape:Flange Type; Bearing Material:Stainless Steel; Days to Ship:7 Days; Bearing Used:Deep Groove Ball Bea; Number of Bearings:Double; Bearing I.D. d(mm):12; Seals:ZZ (Double Shield); Bearing Retained:No;

Double row tapered roller bearings

SKF manufactures double row tapered roller bearings in the TDO (fig. 1) and TDI (fig. 2) designs, in many variants and with different features (→ Designs and

Tapered Roller Bearings | Fersa Bearings

Tapered roller bearings in metric and inch series. Flange side bearings. Single and double row. Thrust and steering bearings and U series. Fersa part numbers

Single Row Tapered Roller Bearings | Single Row TRB - NBC

The correct amount of radial and axial clearance is obtained by adjusting the two bearings against each other. Besides, double row and four row taper roller bearings are also widely used for heavy loads such as rolling mills. A single row taper roller bearing can be located endwise in one direction only