| Single row tapered roller bearings 32948 | A:48 mm; A1:15 mm; e:17 mm; Recommended tightening torque for set screw:16.8 Nm; T max.:200 °C; B1:77.7 mm; A2:63.8 mm; d1:82 mm; L:195 mm; S:30.9 mm; |
| Single row tapered roller bearings 32952 | Flush Ground:No; Number of Bearings:1 (Single); Raceway Style:Not Applicable; Noun:Bearing; ra max:1 mm; Product Group:B04270; Width:0.591 Inch | 15 Mill; Bore:0.984 Inch | 25 Mill; da min:30 mm; Characteristic rolling element frequency, BSF:4.71 Hz; |
| Single row tapered roller bearings 32926 | B:77.8 mm; A1:22 mm; S:33.3 mm; Designation of bearing:UC215-47G2T04; Weight:5.9 kg; C:66 kN; A2:78.5 mm; L:200 mm; C0:49.5 kN; T min.:-40 °C; |
| Single row tapered roller bearings 30332 | Raceway Ring Shape:Needle Roller; Revolution Frequency(rpm):9000; Basic Load Rating, Dynamic Rating(N):12000; Series:Heavy Load; Format symbol:HMK; Size Standards:Metric System; Post-assembly heat treatment (pre-bent type):No; Case hardening (outer ring only):No; Outer Ring Type:Flat; Outer Ring:With Outer Ring; |
| Single row tapered roller bearings 32064X | Width T(mm):14; Shape:Flanged Pilot Type; Housing Material:304 Stainless Steel; Type:Bearings with Housin; Bearing Retained:Yes (with retaining; Volume Discount:Available; Holder Surface Treatment:Not Provided; Bearing Material:[Steel] Steel; RoHS:6; Number of Bearings:Single; |
| Single row tapered roller bearings 30328 | Contact angle(Degree):30; Outer Ring:With Outer Ring; Special Configurations Code:No; Size Standards:Metric System; Combination symbol:No; Symbol of Bearing Ring Shape:No; Inner/Outer Ring Material:[Steel] Steel; Load Direction:Radial; RoHS:6; Seal, Shield Symbols:No; |
| Single row tapered roller bearings 32328 | Raceway Ring Shape:Needle Roller; Revolution Frequency(rpm):9000; Basic Load Rating, Dynamic Rating(N):12000; Series:Heavy Load; Format symbol:HMK; Size Standards:Metric System; Post-assembly heat treatment (pre-bent type):No; Case hardening (outer ring only):No; Outer Ring Type:Flat; Outer Ring:With Outer Ring; |
| Single row tapered roller bearings 32060X | Contact angle(Degree):30; Outer Ring:With Outer Ring; Special Configurations Code:No; Size Standards:Metric System; Combination symbol:No; Symbol of Bearing Ring Shape:No; Inner/Outer Ring Material:[Steel] Steel; Load Direction:Radial; RoHS:6; Seal, Shield Symbols:No; |
| Single row tapered roller bearings 32321 | Shape:Flange Type; Bearing Used:Deep Groove Ball Bea; Bearing Part Number:6201; Flange Shape:Round Type; Number of Bearings:Double; Type:Bearings with Housin; Flange O.D. H(φ):56; Housing Material:304 Stainless Steel; RoHS:6; |
| Single row tapered roller bearings 32226 | Seals:ZZ (Double Shield); Bearing Material:[Steel] Steel; Number of Bearings:Single; Shape:Flange Type; Volume Discount:Available; Housing Material:1045 Carbon Steel; Type:Bearings with Housin; Holder Surface Treatment:Black Oxide Coating; Days to Ship:7 Days; Flange Shape:Compact Type; |
Double row tapered roller bearings
SKF manufactures double row tapered roller bearings in the TDO (fig. 1) and TDI (fig. 2) designs, in many variants and with different features (→ Designs and
Tapered Roller Bearings | Fersa Bearings
Tapered roller bearings in metric and inch series. Flange side bearings. Single and double row. Thrust and steering bearings and U series. Fersa part numbers
Single row tapered roller bearings
This provides optimal load distribution, reduces noise and vibration, and enables preload to be set more accurately. A single row tapered roller bearing is typically adjusted against a second tapered roller bearing. By applying a preload, a rigid bearing application can be achieved
SKF Single row tapered roller bearing metric | ERIKS shop NL
The projection lines of the raceways meet at a common point on the bearing axis to provide true rolling and low friction. Single row tapered roller bearings are
Tapered Roller Bearings | The Timken Company
Inch Single Row. Single-row tapered roller bearings are the most basic and widely used, consisting of a cone assembly and a cup. Timken patented the first in
Single Row Tapered Roller Bearings | Single Row TRB - NBC
The correct amount of radial and axial clearance is obtained by adjusting the two bearings against each other. Besides, double row and four row taper roller bearings are also widely used for heavy loads such as rolling mills. A single row taper roller bearing can be located endwise in one direction only