Komatsu tube 198-911-7880 DUCT	L:219 mm; Recommended tightening torque for set screw:16.8 Nm; G:M6x1; C:43.55 kN; S:22.2 mm; Designation of bearing:UC211-35G2T20; T min.:-20 °C; N:20mm; H1:22 mm; H2:126 mm;
Komatsu tube 14X-911-8462 DUCT	Flange Shape:Round Type; Bearing Material:[Steel] Steel; Bearing I.D. d(mm):10; Flange O.D. H(φ):50; RoHS:6; Bearing Retained:Yes (with retaining; Type:Bearings with Housin; Bearing Used:Deep Groove Ball Bea; Width T(mm):40; Volume Discount:Available;
Komatsu tube 19M-979-6290 DUCT	Inventory:0.0; Characteristic inner ring frequency, BPFI:7.8 Hz; Min operating temperature, Tmin:-40 °C; Da max:202 mm; Brand:NTN; Nlim (oil):3,100 rpm; Weight / Kilogram:13; Characteristic rolling element frequency, BSF:4.78 Hz; Characteristic outer ring frequency, BPF0:5.2 Hz; Mass (without HJ ring):13 kg;
Komatsu tube 11Y-54-47710 DUCT	Bearing Retained:Yes (with retaining; Type:Bearings with Housin; Seals:VV (Non-Contact Rubb; Volume Discount:Available; Holder Surface Treatment:Black Oxide Coating; Bearing Material:[Steel] Steel; Bearing Part Number:6006; Shape:Flanged Pilot Type;
Komatsu tube 41L-03-22112 DUCT	H:105 mm; Designation of housing:PH209-; A:70 mm; H1:20 mm; G:M6x1; Recommended tightening torque for set screw:11.5 Nm; N1:25 mm; J:146 mm; H2:157 mm; T max.:100 °C;
Komatsu tube 21T-979-6330 DUCT	Dynamic load, C:21.2 kN; da min:31.5 mm; rs min:1.1 mm; Brand:NTN; Mass:0.23 kg; Fatigue limit load, Cu:0.5 kN; Min operating temperature, Tmin:-20 °C; Da max:55.5 mm; f0:12.6; Nlim (grease):12,000 rpm;
Komatsu tube 206-53-81182 DUCT	B:55.4 mm; Designation of open end cover:SCOE211-55; H2:125 mm; E:20 mm; Z:104.5 mm; L:150 mm; C:43.55 kN; Recommended tightening torque for set screw:22 Nm; T max.:100 °C; d1:74.5 mm;
Komatsu tube 42C-07-13330 DUCT	Housing Material:1045 Carbon Steel; Number of Bearings:Double; Seals:ZZ (Double Shield); Type:Bearings with Housin; Holder Surface Treatment:Black Oxide Coating; Volume Discount:Available; Bearing Used:Deep Groove Ball Bea; Bearing Retained:No;
Komatsu tube 567-07-76320 DUCT	L:219 mm; Recommended tightening torque for set screw:16.8 Nm; G:M6x1; C:43.55 kN; S:22.2 mm; Designation of bearing:UC211-35G2T20; T min.:-20 °C; N:20mm; H1:22 mm; H2:126 mm;
Komatsu tube 209-53-11440NY DUCT	Dynamic load, C:21.2 kN; da min:31.5 mm; rs min:1.1 mm; Brand:NTN; Mass:0.23 kg; Fatigue limit load, Cu:0.5 kN; Min operating temperature, Tmin:-20 °C; Da max:55.5 mm; f0:12.6; Nlim (grease):12,000 rpm;