| Komatsu tube 198-911-6451 DUCT | H:105 mm; Designation of housing:PH209-; A:70 mm; H1:20 mm; G:M6x1; Recommended tightening torque for set screw:11.5 Nm; N1:25 mm; J:146 mm; H2:157 mm; T max.:100 °C; |
| Komatsu tube 3FE-94-41251XCKF DUCT | Characteristic rolling element frequency, BSF:7.04 Hz; Weight / Kilogram:0; Y2:1.73; Manufacturer Name:NTN; EAN:4547359541021; Y0:0.95; e:0.35; Brand:NTN; Characteristic outer ring frequency, BPF0:8.21 Hz; B:36.68 mm; |
| Komatsu tube 198-54-57290 DUCT | L:219 mm; Recommended tightening torque for set screw:16.8 Nm; G:M6x1; C:43.55 kN; S:22.2 mm; Designation of bearing:UC211-35G2T20; T min.:-20 °C; N:20mm; H1:22 mm; H2:126 mm; |
| Komatsu tube 566-89-8H181 DUCT | Outer Ring:With Outer Ring; D:53; d:43; Outer Ring Type:Flat; Inner/Outer Ring Material:Steel; Size Standards:Metric System; Raceway Ring Shape:Needle Roller; Basic Load Rating, Dynamic Rating(N):27500; |
| Komatsu tube 17A-979-2221 DUCT | Inventory:0.0; Characteristic inner ring frequency, BPFI:7.8 Hz; Min operating temperature, Tmin:-40 °C; Da max:202 mm; Brand:NTN; Nlim (oil):3,100 rpm; Weight / Kilogram:13; Characteristic rolling element frequency, BSF:4.78 Hz; Characteristic outer ring frequency, BPF0:5.2 Hz; Mass (without HJ ring):13 kg; |
| Komatsu tube 14X-911-8462 DUCT | Flange Shape:Round Type; Bearing Material:[Steel] Steel; Bearing I.D. d(mm):10; Flange O.D. H(φ):50; RoHS:6; Bearing Retained:Yes (with retaining; Type:Bearings with Housin; Bearing Used:Deep Groove Ball Bea; Width T(mm):40; Volume Discount:Available; |
| Komatsu tube 198-911-6590 DUCT | B:55.4 mm; Designation of open end cover:SCOE211-55; H2:125 mm; E:20 mm; Z:104.5 mm; L:150 mm; C:43.55 kN; Recommended tightening torque for set screw:22 Nm; T max.:100 °C; d1:74.5 mm; |
| Komatsu tube 17A-979-2211 DUCT | Bearing Retained:Yes (with retaining; Type:Bearings with Housin; Seals:VV (Non-Contact Rubb; Volume Discount:Available; Holder Surface Treatment:Black Oxide Coating; Bearing Material:[Steel] Steel; Bearing Part Number:6006; Shape:Flanged Pilot Type; |
| Komatsu tube 195-03-65431 DUCT | L:219 mm; Recommended tightening torque for set screw:16.8 Nm; G:M6x1; C:43.55 kN; S:22.2 mm; Designation of bearing:UC211-35G2T20; T min.:-20 °C; N:20mm; H1:22 mm; H2:126 mm; |
| Komatsu tube 421-07-23610 DUCT | G:M6x1; d:53.98 mm; T min.:-20 °C; s1:27.8 mm; T max.:100 °C; S:22.2 mm; Z:77 mm; A:60 mm; C:43.55 kN; H2:126 mm; |