Komatsu tube 23D-809-3420 DUCT	Flange Shape:Round Type; Bearing Material:[Steel] Steel; Bearing I.D. d(mm):10; Flange O.D. H(φ):50; RoHS:6; Bearing Retained:Yes (with retaining; Type:Bearings with Housin; Bearing Used:Deep Groove Ball Bea; Width T(mm):40; Volume Discount:Available;
Komatsu tube 17A-54-46223 DUCT	Flange Shape:Round Type; Bearing Material:[Steel] Steel; Bearing I.D. d(mm):10; Flange O.D. H(φ):50; RoHS:6; Bearing Retained:Yes (with retaining; Type:Bearings with Housin; Bearing Used:Deep Groove Ball Bea; Width T(mm):40; Volume Discount:Available;
Komatsu tube 176-01-55350 DUCT	L:219 mm; Recommended tightening torque for set screw:16.8 Nm; G:M6x1; C:43.55 kN; S:22.2 mm; Designation of bearing:UC211-35G2T20; T min.:-20 °C; N:20mm; H1:22 mm; H2:126 mm;
Komatsu tube 23B-809-8913 DUCT	Inventory:0.0; Characteristic inner ring frequency, BPFI:7.8 Hz; Min operating temperature, Tmin:-40 °C; Da max:202 mm; Brand:NTN; Nlim (oil):3,100 rpm; Weight / Kilogram:13; Characteristic rolling element frequency, BSF:4.78 Hz; Characteristic outer ring frequency, BPF0:5.2 Hz; Mass (without HJ ring):13 kg;
Komatsu tube 42C-07-13330 DUCT	Housing Material:1045 Carbon Steel; Number of Bearings:Double; Seals:ZZ (Double Shield); Type:Bearings with Housin; Holder Surface Treatment:Black Oxide Coating; Volume Discount:Available; Bearing Used:Deep Groove Ball Bea; Bearing Retained:No;
Komatsu tube 12Y-54-27712 DUCT	H:105 mm; Designation of housing:PH209-; A:70 mm; H1:20 mm; G:M6x1; Recommended tightening torque for set screw:11.5 Nm; N1:25 mm; J:146 mm; H2:157 mm; T max.:100 °C;
Komatsu tube 206-53-81182 DUCT	Outer Ring:With Outer Ring; D:53; d:43; Outer Ring Type:Flat; Inner/Outer Ring Material:Steel; Size Standards:Metric System; Raceway Ring Shape:Needle Roller; Basic Load Rating, Dynamic Rating(N):27500;
Komatsu tube 208-977-7240 DUCT	H:105 mm; Designation of housing:PH209-; A:70 mm; H1:20 mm; G:M6x1; Recommended tightening torque for set screw:11.5 Nm; N1:25 mm; J:146 mm; H2:157 mm; T max.:100 °C;
Komatsu tube 23A-952-7510 DUCT	H:105 mm; Designation of housing:PH209-; A:70 mm; H1:20 mm; G:M6x1; Recommended tightening torque for set screw:11.5 Nm; N1:25 mm; J:146 mm; H2:157 mm; T max.:100 °C;
Komatsu tube 427-Z90-3260 DUCT	Bearing Retained:Yes (with retaining; Type:Bearings with Housin; Seals:VV (Non-Contact Rubb; Volume Discount:Available; Holder Surface Treatment:Black Oxide Coating; Bearing Material:[Steel] Steel; Bearing Part Number:6006; Shape:Flanged Pilot Type;