| Komatsu tube 56D-07-32120 DUCT | L:219 mm; Recommended tightening torque for set screw:16.8 Nm; G:M6x1; C:43.55 kN; S:22.2 mm; Designation of bearing:UC211-35G2T20; T min.:-20 °C; N:20mm; H1:22 mm; H2:126 mm; |
| Komatsu tube 56D-07-35510 DUCT | Dynamic load, C:21.2 kN; da min:31.5 mm; rs min:1.1 mm; Brand:NTN; Mass:0.23 kg; Fatigue limit load, Cu:0.5 kN; Min operating temperature, Tmin:-20 °C; Da max:55.5 mm; f0:12.6; Nlim (grease):12,000 rpm; |
| Komatsu tube 56D-07-32410 DUCT | Bearing Retained:Yes (with retaining; Type:Bearings with Housin; Seals:VV (Non-Contact Rubb; Volume Discount:Available; Holder Surface Treatment:Black Oxide Coating; Bearing Material:[Steel] Steel; Bearing Part Number:6006; Shape:Flanged Pilot Type; |
| Komatsu tube 21T-979-6340 DUCT | G:M6x1; d:53.98 mm; T min.:-20 °C; s1:27.8 mm; T max.:100 °C; S:22.2 mm; Z:77 mm; A:60 mm; C:43.55 kN; H2:126 mm; |
| Komatsu tube 23B-809-9631 DUCT | Inventory:0.0; Characteristic inner ring frequency, BPFI:7.8 Hz; Min operating temperature, Tmin:-40 °C; Da max:202 mm; Brand:NTN; Nlim (oil):3,100 rpm; Weight / Kilogram:13; Characteristic rolling element frequency, BSF:4.78 Hz; Characteristic outer ring frequency, BPF0:5.2 Hz; Mass (without HJ ring):13 kg; |
| Komatsu tube 567-07-76910 DUCT ASS'Y | L:219 mm; Recommended tightening torque for set screw:16.8 Nm; G:M6x1; C:43.55 kN; S:22.2 mm; Designation of bearing:UC211-35G2T20; T min.:-20 °C; N:20mm; H1:22 mm; H2:126 mm; |
| Komatsu tube 195-03-64141 DUCT | B:55.4 mm; Designation of open end cover:SCOE211-55; H2:125 mm; E:20 mm; Z:104.5 mm; L:150 mm; C:43.55 kN; Recommended tightening torque for set screw:22 Nm; T max.:100 °C; d1:74.5 mm; |
| Komatsu tube 421-07-31620 DUCT | Outer Ring:With Outer Ring; D:53; d:43; Outer Ring Type:Flat; Inner/Outer Ring Material:Steel; Size Standards:Metric System; Raceway Ring Shape:Needle Roller; Basic Load Rating, Dynamic Rating(N):27500; |
| Komatsu tube 56D-02-32580 DUCT | B:55.4 mm; Designation of open end cover:SCOE211-55; H2:125 mm; E:20 mm; Z:104.5 mm; L:150 mm; C:43.55 kN; Recommended tightening torque for set screw:22 Nm; T max.:100 °C; d1:74.5 mm; |
| Komatsu tube 21T-979-6352 DUCT | Dynamic load, C:21.2 kN; da min:31.5 mm; rs min:1.1 mm; Brand:NTN; Mass:0.23 kg; Fatigue limit load, Cu:0.5 kN; Min operating temperature, Tmin:-20 °C; Da max:55.5 mm; f0:12.6; Nlim (grease):12,000 rpm; |