Komatsu tube 195-911-8950 DUCT	L:219 mm; Recommended tightening torque for set screw:16.8 Nm; G:M6x1; C:43.55 kN; S:22.2 mm; Designation of bearing:UC211-35G2T20; T min.:-20 °C; N:20mm; H1:22 mm; H2:126 mm;
Komatsu tube TC5849052061KF AIR DUCT	L:219 mm; Recommended tightening torque for set screw:16.8 Nm; G:M6x1; C:43.55 kN; S:22.2 mm; Designation of bearing:UC211-35G2T20; T min.:-20 °C; N:20mm; H1:22 mm; H2:126 mm;
Komatsu tube 23A-952-7510 DUCT	H:105 mm; Designation of housing:PH209-; A:70 mm; H1:20 mm; G:M6x1; Recommended tightening torque for set screw:11.5 Nm; N1:25 mm; J:146 mm; H2:157 mm; T max.:100 °C;
Komatsu tube 428-Z90-3251 DUCT	B:55.4 mm; Designation of open end cover:SCOE211-55; H2:125 mm; E:20 mm; Z:104.5 mm; L:150 mm; C:43.55 kN; Recommended tightening torque for set screw:22 Nm; T max.:100 °C; d1:74.5 mm;
Komatsu tube 12Y-54-27712 DUCT	H:105 mm; Designation of housing:PH209-; A:70 mm; H1:20 mm; G:M6x1; Recommended tightening torque for set screw:11.5 Nm; N1:25 mm; J:146 mm; H2:157 mm; T max.:100 °C;
Komatsu tube 195-01-41190 DUCT	Outer Ring Shape:Flat; Basic Dynamic Load Rating(N):35000; Number of Raceway Ring Rows:Single Row; Retainer Type:Punching; Load Direction:Radial; Days to Ship:6 Days or more; Rolling Element Material:Steel; Max. Allowed rpm(rpm):4700; Type:Ball; Preload Mark:C3;
Komatsu tube 426-Z84-5850 DUCT	G:M6x1; d:53.98 mm; T min.:-20 °C; s1:27.8 mm; T max.:100 °C; S:22.2 mm; Z:77 mm; A:60 mm; C:43.55 kN; H2:126 mm;
Komatsu tube 17A-01-41540 DUCT	Dynamic load, C:21.2 kN; da min:31.5 mm; rs min:1.1 mm; Brand:NTN; Mass:0.23 kg; Fatigue limit load, Cu:0.5 kN; Min operating temperature, Tmin:-20 °C; Da max:55.5 mm; f0:12.6; Nlim (grease):12,000 rpm;
Komatsu tube 21T-979-6361 DUCT	B:55.4 mm; Designation of open end cover:SCOE211-55; H2:125 mm; E:20 mm; Z:104.5 mm; L:150 mm; C:43.55 kN; Recommended tightening torque for set screw:22 Nm; T max.:100 °C; d1:74.5 mm;
Komatsu tube 3EC-02-A7430KF DUCT	Flange Shape:Round Type; Bearing Material:[Steel] Steel; Bearing I.D. d(mm):10; Flange O.D. H(φ):50; RoHS:6; Bearing Retained:Yes (with retaining; Type:Bearings with Housin; Bearing Used:Deep Groove Ball Bea; Width T(mm):40; Volume Discount:Available;