| Komatsu tube 42C-01-14221 DUCT | Outer Ring:With Outer Ring; D:53; d:43; Outer Ring Type:Flat; Inner/Outer Ring Material:Steel; Size Standards:Metric System; Raceway Ring Shape:Needle Roller; Basic Load Rating, Dynamic Rating(N):27500; |
| Komatsu tube 421-07-33323 DUCT | Outer Ring:With Outer Ring; D:53; d:43; Outer Ring Type:Flat; Inner/Outer Ring Material:Steel; Size Standards:Metric System; Raceway Ring Shape:Needle Roller; Basic Load Rating, Dynamic Rating(N):27500; |
| Komatsu tube 195-01-41211 DUCT | G:M6x1; d:53.98 mm; T min.:-20 °C; s1:27.8 mm; T max.:100 °C; S:22.2 mm; Z:77 mm; A:60 mm; C:43.55 kN; H2:126 mm; |
| Komatsu tube 21N-54-41321 DUCT | Inventory:0.0; Characteristic inner ring frequency, BPFI:7.8 Hz; Min operating temperature, Tmin:-40 °C; Da max:202 mm; Brand:NTN; Nlim (oil):3,100 rpm; Weight / Kilogram:13; Characteristic rolling element frequency, BSF:4.78 Hz; Characteristic outer ring frequency, BPF0:5.2 Hz; Mass (without HJ ring):13 kg; |
| Komatsu tube 21T-979-6381 DUCT | Inventory:0.0; Characteristic inner ring frequency, BPFI:7.8 Hz; Min operating temperature, Tmin:-40 °C; Da max:202 mm; Brand:NTN; Nlim (oil):3,100 rpm; Weight / Kilogram:13; Characteristic rolling element frequency, BSF:4.78 Hz; Characteristic outer ring frequency, BPF0:5.2 Hz; Mass (without HJ ring):13 kg; |
| Komatsu tube 12Y-54-27712 DUCT | H:105 mm; Designation of housing:PH209-; A:70 mm; H1:20 mm; G:M6x1; Recommended tightening torque for set screw:11.5 Nm; N1:25 mm; J:146 mm; H2:157 mm; T max.:100 °C; |
| Komatsu tube 154-54-74690 DUCT | G:M6x1; d:53.98 mm; T min.:-20 °C; s1:27.8 mm; T max.:100 °C; S:22.2 mm; Z:77 mm; A:60 mm; C:43.55 kN; H2:126 mm; |
| Komatsu tube 195-01-43241 DUCT | G:M6x1; d:53.98 mm; T min.:-20 °C; s1:27.8 mm; T max.:100 °C; S:22.2 mm; Z:77 mm; A:60 mm; C:43.55 kN; H2:126 mm; |
| Komatsu tube 198-Y11-2320 DUCT | G:M6x1; d:53.98 mm; T min.:-20 °C; s1:27.8 mm; T max.:100 °C; S:22.2 mm; Z:77 mm; A:60 mm; C:43.55 kN; H2:126 mm; |
| Komatsu tube 23C-809-6111 DUCT | H:105 mm; Designation of housing:PH209-; A:70 mm; H1:20 mm; G:M6x1; Recommended tightening torque for set screw:11.5 Nm; N1:25 mm; J:146 mm; H2:157 mm; T max.:100 °C; |