| Komatsu GOVERNOR ASS'Y DK105407-4211 GOVERNOR ASS'Y | B:19.1 mm; S:6.5 mm; N1:19 mm; H:30.2 mm; A1:18 mm; G:M6x1; N:11mm; d:17.46 mm; Recommended tightening torque for set screw:3.7 Nm; L:125 mm; |
| Komatsu GOVERNOR ASS'Y ND190800-6790 GOVERNOR ASS'Y | N1:23 mm; H2:108 mm; L:190 mm; A:54 mm; T min.:-40 °C; N:17mm; G:M6x1; d1:62 mm; C:31.85 kN; J:146 mm; |
| Komatsu GOVERNOR ASS'Y NJ19100-K9400KF GOVERNOR ASS'Y | N1:23 mm; H2:108 mm; L:190 mm; A:54 mm; T min.:-40 °C; N:17mm; G:M6x1; d1:62 mm; C:31.85 kN; J:146 mm; |
| Komatsu GOVERNOR ASS'Y DK105404-6070 GOVERNOR ASS'Y | B1:57.1 mm; S:19.8 mm; B:41.3 mm; L:150 mm; J:112 mm; C0:24 kN; A2:50.3 mm; A:40 mm; Designation of housing:FS308-; H3:115; |
| Komatsu GOVERNOR ASS'Y DK105400-3300 GOVERNOR ASS'Y | d:36.51 mm; H:161 mm; T min.:-20 °C; B:42.9 mm; Z:30 mm; Recommended tightening torque for set screw:8 Nm; L1:82 mm; C:25.7 kN; L:90 mm; Designation of bearing:UC207-23G2L4; |
| Komatsu GOVERNOR ASS'Y NJ19100-K9201KF GOVERNOR ASS'Y | d:36.51 mm; H:161 mm; T min.:-20 °C; B:42.9 mm; Z:30 mm; Recommended tightening torque for set screw:8 Nm; L1:82 mm; C:25.7 kN; L:90 mm; Designation of bearing:UC207-23G2L4; |
| Komatsu GOVERNOR ASS'Y DK105407-5533 GOVERNOR ASS'Y | N1:23 mm; H2:108 mm; L:190 mm; A:54 mm; T min.:-40 °C; N:17mm; G:M6x1; d1:62 mm; C:31.85 kN; J:146 mm; |
| Komatsu GOVERNOR ASS'Y YM119740-61110 GOVERNOR ASS'Y | Grease symbol:/2AS; D:100; Retainer Type:Punching; Load Direction:Radial; Rolling Element Material:Steel; d:35; Inner/Outer Ring Material:Steel; Preload Mark:C3; Size Standards:Metric System; |
| Komatsu GOVERNOR ASS'Y DK105407-6450 GOVERNOR ASS'Y | Pillow Type, Category:Thick Wall; d:40; Machining:No; Surface Treatment:No; Rolling Element Material:Bearing Steel; Fit:J7; Diameter series symbol:Used for Light load; RoHS:6; |
| Komatsu GOVERNOR ASS'Y DK105447-1851 GOVERNOR ASS'Y | Max operating temperature, Tmax:120 °C; rs min:2 mm; Characteristic cage frequency, FTF:0.43 Hz; Characteristic inner ring frequency, BPFI:10.88 Hz; D:140 mm; Da max:131.5 mm; Characteristic outer ring frequency, BPF0:8.12 Hz; Characteristic rolling element frequency, BSF:6.68 Hz; Fatigue limit load, Cu:34.5 kN; Number of lubrication holes:3; |