| Komatsu 703-04-91260 ROTOR | Bearing Used:Deep Groove Ball Bea; Shape:Flanged Pilot Type; Bearing Material:[Steel] Steel; Volume Discount:Available; Seals:VV (Non-Contact Rubb; Bearing Retained:Yes (with retaining; Housing Material:304 Stainless Steel; Width T(mm):45; Number of Bearings:Double; |
| Komatsu 6505-61-5952 ROTOR ASS'Y | J:78 mm; L1:54 mm; A2:37.1 mm; G:M6x1; L:60 mm; e:15 mm; A:25.5 mm; s1:23.05 mm; B1:28.6 mm; C:9.55 kN; |
| Komatsu KD0-35100-0311 ROTOR ASS'Y | J:80 mm; Designation of open end cover:SCOU207-22; C:25.7 kN; Designation of closed end cover:SCC207; L:110 mm; A1:27 mm; H2:95 mm; S:17.5 mm; L1:30 mm; G:M6x1; |
| Komatsu KD0-35100-0080 ROTOR ASS'Y | Inner/Outer Ring Material:Steel; Revolution Frequency(rpm):3200; d:75; Load Direction:Radial; Specifications/Environment:Standard; Basic Load Rating, Dynamic Rating(N):69500; Number of Raceway Ring Rows:Single Row; B:20; |
| Komatsu SD1221-16700X0 ROTOR ASS'Y | d:57.15 mm; A:68 mm; H2:138 mm; H:69.9 mm; s1:26.85 mm; T max.:200 °C; T min.:-20 °C; H1:15 mm; L:150 mm; A1:36 mm; |
| Komatsu 6505-51-3110 ROTOR | da min:66.5 mm; Min operating temperature, Tmin:-25 °C; f0:15.6; Dynamic load, C:29.5 kN; B:18 mm; Mass:0.41 kg; Radial clearance class:C3; rs min:1.1 mm; Static load, C0:23.2 kN; Fatigue limit load, Cu:1.05 kN; |
| Komatsu 154-60-71620 ROTOR | Dz:54 mm; d1:32.4 mm; L:86 mm; C:12.8 kN; d:12 mm; e:15 mm; C0:6.65 kN; Z:45.8 mm; A:25.5 mm; A1:11 mm; |
| Komatsu 21T-62-82980 ROTOR | Designation of bearing:UC206-20G2T20; T max.:200 °C; H2:84 mm; H1:13 mm; Designation of housing:PA206-; J:66 mm; S:15.9 mm; s1:19.05 mm; A:48 mm; B:38.1 mm; |
| Komatsu 6505-61-5992 ROTOR ASS'Y | Bearing Used:Deep Groove Ball Bea; Shape:Flanged Pilot Type; Bearing Material:[Steel] Steel; Volume Discount:Available; Seals:VV (Non-Contact Rubb; Bearing Retained:Yes (with retaining; Housing Material:304 Stainless Steel; Width T(mm):45; Number of Bearings:Double; |
| Komatsu NJ16182-K8410KF ROTOR | C:12.8 kN; Weight:0.63 kg; d1:32.4 mm; B:21.4 mm; d:20 mm; G:M6x1; S:7.5 mm; Recommended tightening torque for set screw:5.5 Nm; B1:30.9 mm; T min.:-20 °C; |