Komatsu 423-54-54821 FLOOR	A1:10 mm; A:29.5 mm; e:19 mm; Weight:0.39 kg; L:86 mm; A2:35 mm; s1:11 mm; N:11,5mm; B:22 mm; Designation of bearing:US201G2;
Komatsu 423-54-24121 FLOOR	Basic Dynamic Load Rating(N):4300; Type:Ball; Types:16**/6*** series; Days to Ship:6 Days; Load Direction:Radial; B:7; Seal, Shield Symbols:LLB; Holder Symbol:JR; Retainer Type:Punching; Rolling Element Material:Steel;
Komatsu 423-54-24111 FLOOR	B:69.8 mm; Mass:9.25 kg; Number of lubrication holes:3; d2:130.2 mm; Characteristic rolling element frequency, BSF:6.25 Hz; D1:175.8 mm; Characteristic outer ring frequency, BPF0:7.62 Hz; da min:122 mm; Brand:SNR; Y1:2.12;
Komatsu 41L-54-23352 FLOOR	B:69.8 mm; Mass:9.25 kg; Number of lubrication holes:3; d2:130.2 mm; Characteristic rolling element frequency, BSF:6.25 Hz; D1:175.8 mm; Characteristic outer ring frequency, BPF0:7.62 Hz; da min:122 mm; Brand:SNR; Y1:2.12;
Komatsu 424-54-12173 FLOOR	Width T(mm):8; Days to Ship:7 Days; Bearing Material:[Steel] Steel; RoHS:6; Number of Bearings:Single; Bearing Used:Deep Groove Ball Bea; Volume Discount:Available; Flange Shape:Round Type; Bearing Retained:No;
Komatsu 425-V33-2112 FLOOR	Designation of bearing:US202G2T20; A:25.5 mm; Dz:46 mm; Designation of housing:FA203N-; A1:12 mm; N:10mm; J:78 mm; e:15 mm; Weight:0.3 kg; L:60 mm;
Komatsu 41E-54-14630 FLOOR	L:214 mm; Designation of closed end cover:SCC210; Designation of open end cover:SCOU210-31; Dz:100 mm; Z:77.1 mm; Designation of bearing:UC210-31G2L3; Designation of housing:PLE210N-; S:19 mm; H2:114 mm; G:M6x1;
Komatsu 22B-54-23721 FLOOR	Stroke:No; B:54; d:40; Bearing Inner Dia. Shape:Tapered hole adapter; Machining:No; Surface Treatment:No; Fit:J7; Rolling Element Material:Bearing Steel; Pillow Type, Category:Standard;
Komatsu 426-54-24310 FLOOR	dc min:80 mm; Manufacturer Name:NTN; r1s min:1.5 mm; Dynamic load, C:96 kN; da min:68 mm; Nlim (oil):6,800 rpm; Da max:102 mm; Weight / Kilogram:1.116; ra max:1.5 mm; Fatigue limit load, Cu:14.1 kN;
Komatsu 428-54-22690 FLOOR	Type:Bearings with Housin; Housing Material:[Aluminum Alloy] Alu; Holder Surface Treatment:Clear Anodize; Bearing Used:Deep Groove Ball Bea; Height H(mm):15 ～ 30; RoHS:6; C Chamfered:Not Provided; Shape:T-Shaped;