Komatsu MASK 14X-54-31821 MASK	Bearing Retained:Yes (with retaining; Shape:Flange Type; Holder Surface Treatment:Black Oxide Coating; Bearing I.D. d(mm):12; Width T(mm):35; Seals:DD (Contact Rubber S; Volume Discount:Available; Bearing Material:[Steel] Steel; Housing Material:1045 Carbon Steel;
Komatsu MASK 195-54-65360 MASK	Bearing Material:Stainless Steel; Shape:Flanged Pilot Type; Housing Material:304 Stainless Steel; Flange Shape:Square Type; Flange O.D. H(φ):50; RoHS:6; Bearing Retained:No; Number of Bearings:Double; Bearing I.D. d(mm):12;
Komatsu MASK 17A-54-69410 MASK	e:16 mm; A1:14 mm; T min.:-20 °C; Designation of bearing:ES205-15G2; s1:24.2 mm; C0:7.88 kN; d1:37.4 mm; L:68 mm; B:21.4 mm; T max.:100 °C;
Komatsu MASK 154-54-79242 MASK	Harmonized Tariff Code:8482.10.50.68; f0:13.2; Noun:Bearing; Outside Diameter:1.102 Inch | 28 Mill; Fatigue limit load, Cu:0.11 kN; Characteristic rolling element frequency, BSF:4.07 Hz; Maximum Capacity / Filling Slot:No; Manufacturer Name:NTN; rs min:0.3 mm; Da max:26 mm;
Komatsu MASK 14X-54-71161 MASK	Harmonized Tariff Code:8482.10.50.68; f0:13.2; Noun:Bearing; Outside Diameter:1.102 Inch | 28 Mill; Fatigue limit load, Cu:0.11 kN; Characteristic rolling element frequency, BSF:4.07 Hz; Maximum Capacity / Filling Slot:No; Manufacturer Name:NTN; rs min:0.3 mm; Da max:26 mm;
Komatsu MASK 17M-54-41620 MASK	Unit, Type:Insert Bearing Unit; Machining:No; Accessory:With steel plate cov; Seal:Nitrile; Basic Load Rating, Static Rating(N):71500; B:101.6; Basic Load Rating, Dynamic Rating(N):96100; Rolling Element Material:Bearing Steel; d:90;
Komatsu MASK 17A-54-68210 MASK	N2:32 mm; L3:51 mm; H1:76 mm; H:89 mm; A1:12 mm; Designation of bearing:EX205-15G2T04; s1:30.9 mm; N:19mm; P:150 mm; T min.:-40 °C;
Komatsu MASK 23H-54-11251 MASK	Harmonized Tariff Code:8482.10.50.68; f0:13.2; Noun:Bearing; Outside Diameter:1.102 Inch | 28 Mill; Fatigue limit load, Cu:0.11 kN; Characteristic rolling element frequency, BSF:4.07 Hz; Maximum Capacity / Filling Slot:No; Manufacturer Name:NTN; rs min:0.3 mm; Da max:26 mm;
Komatsu MASK 154-54-43640 MASK	Recommended tightening torque for set screw:3.7 Nm; A:27 mm; T min.:-20 °C; J:99 mm; B:34 mm; Weight:0.6 kg; A2:35.7 mm; C0:7.88 kN; T max.:100 °C; d:25.4 mm;
Komatsu MASK 14X-54-39420 MASK	s1:25.8 mm; L:116 mm; d:50 mm; S:19 mm; J:157 mm; Designation of housing:FLE210N-; A1:13 mm; N:18mm; B:51.6 mm; T max.:100 °C;