| Komatsu HUB 56D-03-32510 HUB | Flange O.D. H(φ):54; Shape:Flanged Pilot Type; Volume Discount:Available; Bearing Retained:No; Flange Shape:Round Type; Seals:DD (Contact Rubber S; Number of Bearings:Double; Type:Bearings with Housin; Bearing Used:Deep Groove Ball Bea; |
| Komatsu HUB TZ596B1001-00 HUB | T min.:-20 °C; G:R1/8"; N:14mm; H:180 mm; d:45 mm; Designation of housing:FLE209-; e:24 mm; B:30.2 mm; Weight:1.79 kg; A1:13 mm; |
| Komatsu HUB 3EF-24-61170SGKF 9HUB | Days to Ship:20 Days; Housing Material:A2017; Main Body Shape:T Type; Bearing Retained:No; Surface Treatment:No; Type:Bearing holder set,; Width T(mm):24; |
| Komatsu HUB 3FD-24-32230KF HUB | Characteristic inner ring frequency, BPFI:12.36 Hz; Static load, C0:906 kN; Mass:8.4 kg; D1:188.3 mm; Nref:2,400 rpm; ra max:2 mm; Dynamic load, C:710 kN; Radial clearance class:C4; Min operating temperature, Tmin:-40 °C; Max operating temperature, Tmax:200 °C; |
| Komatsu HUB TZ420B1001-00 HUB | D:47 mm; ra max:1 mm; d:17 mm; b max:1.65 mm; Characteristic outer ring frequency, BPF0:2.54 Hz; Static load, C0:6.55 kN; Mass:0.12 kg; Da max:42 mm; Characteristic rolling element frequency, BSF:3.39 Hz; r0 max:0.4 mm; |
| Komatsu HUB 134-27-61551 HUB | C0:6.65 kN; G:M6x1; Recommended tightening torque for set screw:3.7 Nm; J:64 mm; Designation of bearing:UC203-11G2; T max.:100 °C; N:12mm; L:86 mm; S:12.7 mm; s1:15.5 mm; |
| Komatsu HUB 21J-23-11710 HUB | C0:6.65 kN; G:M6x1; Recommended tightening torque for set screw:3.7 Nm; J:64 mm; Designation of bearing:UC203-11G2; T max.:100 °C; N:12mm; L:86 mm; S:12.7 mm; s1:15.5 mm; |
| Komatsu HUB 3FD-21-32130KF HUB | Characteristic inner ring frequency, BPFI:12.36 Hz; Static load, C0:906 kN; Mass:8.4 kg; D1:188.3 mm; Nref:2,400 rpm; ra max:2 mm; Dynamic load, C:710 kN; Radial clearance class:C4; Min operating temperature, Tmin:-40 °C; Max operating temperature, Tmax:200 °C; |
| Komatsu HUB 56D-23-12716 HUB | T min.:-20 °C; G:R1/8"; N:14mm; H:180 mm; d:45 mm; Designation of housing:FLE209-; e:24 mm; B:30.2 mm; Weight:1.79 kg; A1:13 mm; |
| Komatsu HUB 56D-27-12715 HUB | Recommended tightening torque for set screw:16.8 Nm; d:60.32 mm; N:18mm; J:202 mm; G:R1/8"; A2:69.7 mm; S:25.4 mm; H:238 mm; T max.:100 °C; B:65.1 mm; |