Komatsu HOLDER 6222-11-3201 NOZZLE HOLDER	L3:51 mm; Recommended tightening torque for set screw:5.5 Nm; A1:12 mm; G:M6x1; H1:76 mm; L2:10 mm; B:31 mm; A:32 mm; Designation of bearing:UC204G2T20; Designation of housing:T204N-;
Komatsu HOLDER 8296-70-7750 HOLDER	B:38.1 mm; T max.:100 °C; d:28.58 mm; Weight:1.14 kg; Recommended tightening torque for set screw:3.7 Nm; A1:13 mm; J:83 mm; C:19.5 kN; C0:11.2 kN; T min.:-20 °C;
Komatsu HOLDER 427-22-11240 HOLDER	B:38.1 mm; T max.:100 °C; d:28.58 mm; Weight:1.14 kg; Recommended tightening torque for set screw:3.7 Nm; A1:13 mm; J:83 mm; C:19.5 kN; C0:11.2 kN; T min.:-20 °C;
Komatsu HOLDER 23C-25-51370 HOLDER	Stroke:No; Unit Body Material:Cast Iron; RoHS:6; d:80; Seal:Nitrile; Surface Treatment:No; Unit, Type:Insert Bearing Unit; Rolling Element Material:Bearing Steel; Bearing Unit, Type:Take-Up Type;
Komatsu HOLDER 6215-65-1710 HOLDER	Pillow Type, Category:Standard; Machining:No; Surface Treatment:No; Rolling Element Material:Bearing Steel; Days to Ship:8 Days; Basic Load Rating, Dynamic Rating(N):92700; Grease Type:SH44M; RoHS:6; d:60;
Komatsu HOLDER 46B-ARS-1410KF HOLDER	Size Unit:Inch; Material:52100 Steel; Diameter(inch):3/32; Days to Ship:6 Days;
Komatsu HOLDER NJ16610-GY91DKF HOLDER ASS'Y	f0:15.94; B:18 mm; Contact angle α:15 °; D2:87.82 mm; Axial rigidity:125 N/µm; Axial displacement K Factor:1.06; Mass:0.42 kg; Da max:88 mm; ra max:1 mm; Radial rigidity:614 N/µm;
Komatsu HOLDER 793-615-1210 HOLDER	L3:51 mm; Recommended tightening torque for set screw:5.5 Nm; A1:12 mm; G:M6x1; H1:76 mm; L2:10 mm; B:31 mm; A:32 mm; Designation of bearing:UC204G2T20; Designation of housing:T204N-;
Komatsu HOLDER 793-607-1110 HOLDER	B:38.1 mm; T max.:100 °C; d:28.58 mm; Weight:1.14 kg; Recommended tightening torque for set screw:3.7 Nm; A1:13 mm; J:83 mm; C:19.5 kN; C0:11.2 kN; T min.:-20 °C;
Komatsu HOLDER 562-40-3A360 HOLDER	ra max:2 mm; Radial clearance class:CN; Static load, C0:396 kN; rs min:2.1 mm; Characteristic outer ring frequency, BPF0:5.61 Hz; Dynamic load, C:420 kN; Y1:2; Number of lubrication holes:3; Nref:3,800 rpm; Nlim:4,500 rpm;