Komatsu HOLDER 6222-11-3201 NOZZLE HOLDER	Designation of housing:FCE214-; N:18mm; A2:44.4 mm; J:177 mm; S:30.2 mm; B:74.6 mm; C0:45 kN; A:33 mm; C:62 kN; H3:150;
Komatsu HOLDER 21M-27-31180 HOLDER	Pillow Type, Category:Standard; Machining:No; Surface Treatment:No; Rolling Element Material:Bearing Steel; Days to Ship:8 Days; Basic Load Rating, Dynamic Rating(N):92700; Grease Type:SH44M; RoHS:6; d:60;
Komatsu HOLDER 195-43-45750 HOLDER	f0:15.94; B:18 mm; Contact angle α:15 °; D2:87.82 mm; Axial rigidity:125 N/µm; Axial displacement K Factor:1.06; Mass:0.42 kg; Da max:88 mm; ra max:1 mm; Radial rigidity:614 N/µm;
Komatsu HOLDER 793-415-1140 HOLDER	Type:Bearings with Housin; Seals:ZZ (Double Shield); Holder Surface Treatment:Clear Anodize; Bearing I.D. d(mm):8; Bearing Used:Deep Groove Ball Bea; Width T(mm):15; Height Indication:Height Configurable; Lateral Width L(mm):56; Housing Material:[Aluminum Alloy] Alu; Number of Bearings:Single;
Komatsu HOLDER 793-615-1220 HOLDER	ra max:2 mm; Radial clearance class:CN; Static load, C0:396 kN; rs min:2.1 mm; Characteristic outer ring frequency, BPF0:5.61 Hz; Dynamic load, C:420 kN; Y1:2; Number of lubrication holes:3; Nref:3,800 rpm; Nlim:4,500 rpm;
Komatsu HOLDER 799-401-2530 HOLDER	Stroke:No; Unit Body Material:Cast Iron; RoHS:6; d:80; Seal:Nitrile; Surface Treatment:No; Unit, Type:Insert Bearing Unit; Rolling Element Material:Bearing Steel; Bearing Unit, Type:Take-Up Type;
Komatsu HOLDER BT415114050 HOLDER	Type:Bearings with Housin; Bearing Part Number:6005; Bearing Retained:Yes (with retaining; Housing Material:1045 Carbon Steel; Seals:ZZ (Double Shield); Bearing Material:[Steel] Steel; Number of Bearings:Double; Flange Shape:Square Type; RoHS:6; Volume Discount:Available;
Komatsu HOLDER DK134171-0620 HOLDER	B:38.1 mm; T max.:100 °C; d:28.58 mm; Weight:1.14 kg; Recommended tightening torque for set screw:3.7 Nm; A1:13 mm; J:83 mm; C:19.5 kN; C0:11.2 kN; T min.:-20 °C;
Komatsu HOLDER 23F-843-3220 HOLDER	L3:51 mm; Recommended tightening torque for set screw:5.5 Nm; A1:12 mm; G:M6x1; H1:76 mm; L2:10 mm; B:31 mm; A:32 mm; Designation of bearing:UC204G2T20; Designation of housing:T204N-;
Komatsu HOLDER 198-22-62480 HOLDER	B:38.1 mm; T max.:100 °C; d:28.58 mm; Weight:1.14 kg; Recommended tightening torque for set screw:3.7 Nm; A1:13 mm; J:83 mm; C:19.5 kN; C0:11.2 kN; T min.:-20 °C;