| komatsu 3LA-22-33531SGKF LINK | Number of Bearings:Double; Shape:Flanged Pilot Type; Bearing Part Number:628; RoHS:6; Bearing Retained:Yes (with retaining; Seals:DD (Contact Rubber S; Housing Material:1045 Carbon Steel; Bearing I.D. d(mm):8; |
| komatsu KV-B820-2050 LINK | Type:Bearings with Housin; Lateral Width L(mm):36; Days to Ship:8 Days; Housing Material:1045 Carbon Steel; Shape:Bottom Mount; Bearing Retained:Yes (with retaining; RoHS:6; Height H(mm):20 ～ 30; Number of Bearings:Single; |
| komatsu 22B-946-9770 LINK | f0:13.96; Nlim (oil):36,000 rpm; d1:40.4 mm; Preload level:7; D1:52.05 mm; Preload value:0.13 kN; Radial rigidity:279 N/µm; Fatigue limit load, Cu:0.86 kN; D2:56.44 mm; Axial displacement K Factor:1.54; |
| komatsu 3RA-29-61543UAKF 9LINK | Nlim (grease):18,000 rpm; Radial clearance class:CM; Max operating temperature, Tmax:120 °C; D:40 mm; Mass:0.07 kg; Dynamic load, C:9.6 kN; Characteristic rolling element frequency, BSF:3.78 Hz; ra max:0.6 mm; Characteristic cage frequency, FTF:0.38 Hz; rs min:0.6 mm; |
| komatsu 20Y-70-01180 LINK | f0:13.96; Nlim (oil):36,000 rpm; d1:40.4 mm; Preload level:7; D1:52.05 mm; Preload value:0.13 kN; Radial rigidity:279 N/µm; Fatigue limit load, Cu:0.86 kN; D2:56.44 mm; Axial displacement K Factor:1.54; |
| komatsu 22U-959-1140 LINK | Number of Bearings:Double; Shape:Flanged Pilot Type; Bearing Part Number:628; RoHS:6; Bearing Retained:Yes (with retaining; Seals:DD (Contact Rubber S; Housing Material:1045 Carbon Steel; Bearing I.D. d(mm):8; |
| komatsu 154-78-74131 LINK | Nlim (grease):18,000 rpm; Radial clearance class:CM; Max operating temperature, Tmax:120 °C; D:40 mm; Mass:0.07 kg; Dynamic load, C:9.6 kN; Characteristic rolling element frequency, BSF:3.78 Hz; ra max:0.6 mm; Characteristic cage frequency, FTF:0.38 Hz; rs min:0.6 mm; |
| komatsu 416-850-1140 LINK | Holder Surface Treatment:Clear Anodize; Flange O.D. H(φ):58; Seals:None; Bearing I.D. d(mm):12; Bearing Retained:Yes (with retaining; Cover Type Selection:Height Selection; Days to Ship:6 Days; Bearing Material:Steel; Shape:T-Shaped; |
| komatsu 201-70-77120 LINK | S:14.3 mm; Designation of bearing:SUC205; Dz:60 mm; Z:47.4 mm; A5:19.8 mm; C:11 kN; Designation of housing:ST205N-; N2:32 mm; Designation of open end cover:SCO205-25; Recommended tightening torque for set screw:3.9 Nm; |
| komatsu 21T-818-7891 LINK | N:18mm; J:111 mm; L:143 mm; T max.:100 °C; Dz:100 mm; S:24.6 mm; s1:42.9 mm; Designation of housing:FE210N-; Z:71 mm; T min.:-40 °C; |