komatsu 416-03-33210 SHROUD	Characteristic outer ring frequency, BPF0:2.61 Hz; rs min:0.6 mm; Da max:31 mm; Dynamic load, C:7.75 kN; Min operating temperature, Tmin:-25 °C; Static load, C0:3.6 kN; da min:19 mm; Brand:NTN; Fatigue limit load, Cu:0.16 kN; ra max:0.6 mm;
komatsu 17M-862-6531 SHROUD	Basic Load Rating, Dynamic Rating(N):35100; Surface Treatment:No; Stroke:No; Fit:J7; Unit, Type:Insert Bearing Unit; Accessory:No Cover; Bearing Unit, Type:Square flange shape; d:50;
komatsu 22J-03-15215 SHROUD	A5:21.4 mm; Recommended tightening torque for set screw:16.8 Nm; d1:82 mm; Weight:4.29 kg; s1:39 mm; B:33.4 mm; P:300 mm; N:35mm; G:M6x1; Designation of bearing:ES212-39G2;
komatsu 424-03-42420 SHROUD	Dz:46 mm; A1:9.5 mm; Recommended tightening torque for set screw:3.5 Nm; A:26 mm; H:99 mm; B:22 mm; Z:37.6 mm; T max.:100 °C; C:9.55 kN; d:17 mm;
komatsu 419-03-62451 SHROUD	Dz:46 mm; A1:9.5 mm; Recommended tightening torque for set screw:3.5 Nm; A:26 mm; H:99 mm; B:22 mm; Z:37.6 mm; T max.:100 °C; C:9.55 kN; d:17 mm;
komatsu 208-03-58220 SHROUD	r1s min:0.3 mm; Mass:0.02 kg; B:7 mm; r1a max:0.3 mm; Axial rigidity:48 N/µm; Fatigue limit load, Cu:0.07 kN; db min:17.5 mm; a:8 mm; D2:24.95 mm; Dynamic load, C:1.92 kN;
komatsu 20Y-03-42472ST SHROUD/护罩	Housing Material:[Aluminum Alloy] 201; Holder Surface Treatment:Clear Anodize; RoHS:6; Shape:Flange Type; Seals:DD (Contact Rubber S; Bearing Material:[Steel] Steel; Bearing Retained:No; Bearing Used:Deep Groove Ball Bea; Type:Bearings with Housin; Number of Bearings:Double;
komatsu 12Y-03-33251 SHROUD	A5:21.4 mm; Recommended tightening torque for set screw:16.8 Nm; d1:82 mm; Weight:4.29 kg; s1:39 mm; B:33.4 mm; P:300 mm; N:35mm; G:M6x1; Designation of bearing:ES212-39G2;
komatsu 22U-03-31271 SHROUD	Bearing Retained:No; Bearing Used:Deep Groove Ball Bea; Shape:Flanged Pilot Type; Bearing Material:[Steel] Steel; Type:Bearings with Housin; Bearing Part Number:6803; Width T(mm):30 ～ 40; Number of Bearings:Double; Flange O.D. H(φ):52; Housing Material:1045 Carbon Steel;
komatsu 124-03-61122 SHROUD	Dz:46 mm; A1:9.5 mm; Recommended tightening torque for set screw:3.5 Nm; A:26 mm; H:99 mm; B:22 mm; Z:37.6 mm; T max.:100 °C; C:9.55 kN; d:17 mm;