komatsu 208-30-53310 IDLER | T min.:-40 °C; A2:67.8 mm; L:140 mm; S:14.9 mm; d:60 mm; J1:92 mm; Dz:120 mm; e:29 mm; C0:32.8 kN; J:202 mm; |
komatsu 11G-30-43520 IDLER | Weight:2.2 kg; C0:29.2 kN; C:43.55 kN; B:55.6 mm; A5:33.4 mm; s1:27.8 mm; Recommended tightening torque for set screw:16.8 Nm; S:22.2 mm; T max.:100 °C; G:M6x1; |
komatsu 13S-30-16440 IDLER | Weight:2.2 kg; C0:29.2 kN; C:43.55 kN; B:55.6 mm; A5:33.4 mm; s1:27.8 mm; Recommended tightening torque for set screw:16.8 Nm; S:22.2 mm; T max.:100 °C; G:M6x1; |
komatsu 207-30-48110 IDLER | RoHS:6; Load Direction:Radial; Basic Load Rating, Static Rating(N):1910; Size Standards:Metric System; B:8; Type:Ball; Volume Discount:Available; D:28; Outer Ring Shape:Flat; Number of Raceway Ring Rows:Single Row; |
komatsu 17M-30-28110 IDLER | Thickness, Height Indication:T, h Configurable; Bearing Used:Deep Groove Ball Bea; Holder Surface Treatment:Electroless Nickel P; RoHS:6; Seals:VV (Non-Contact Rubb; Bearing Part Number:6903; Bearing Material:[Steel] Steel; Type:Bearings with Housin; Lateral Width L(mm):64; Bearing I.D. d(mm):17; |
komatsu 21S-35-21210 IDLER | Weight:2.2 kg; C0:29.2 kN; C:43.55 kN; B:55.6 mm; A5:33.4 mm; s1:27.8 mm; Recommended tightening torque for set screw:16.8 Nm; S:22.2 mm; T max.:100 °C; G:M6x1; |
komatsu X212206840ST IDLER+CUSHION.LCUP/涨引装置 | RoHS:6; Load Direction:Radial; Basic Load Rating, Static Rating(N):1910; Size Standards:Metric System; B:8; Type:Ball; Volume Discount:Available; D:28; Outer Ring Shape:Flat; Number of Raceway Ring Rows:Single Row; |
komatsu 21U-30-31610 IDLER | T min.:-40 °C; A2:67.8 mm; L:140 mm; S:14.9 mm; d:60 mm; J1:92 mm; Dz:120 mm; e:29 mm; C0:32.8 kN; J:202 mm; |
komatsu 195-30-61510 IDLER | T max.:100 °C; G:M6x1; B:31 mm; s1:15.5 mm; H2:64 mm; d:15 mm; N:M8; Z:16.3 mm; L:70 mm; H1:14 mm; |
komatsu 11Y-30-18110 IDLER | Basic Load Rating, Static Rating(N):53000; Fit:J7; Seal:Silicone; Bearing Inner Dia. Shape:Tapered hole adapter; Diameter series symbol:Used for Light load; Unit Body Material:Cast Iron; Bearing Unit, Type:Square flange shape; Unit, Type:Insert Bearing Unit; Machining:No; |