| komatsu 10S-30-21210 IDLER | T max.:100 °C; G:M6x1; B:31 mm; s1:15.5 mm; H2:64 mm; d:15 mm; N:M8; Z:16.3 mm; L:70 mm; H1:14 mm; |
| komatsu 208-30-53210 IDLER | T max.:100 °C; G:M6x1; B:31 mm; s1:15.5 mm; H2:64 mm; d:15 mm; N:M8; Z:16.3 mm; L:70 mm; H1:14 mm; |
| komatsu 208-30-53210 IDLER | Min operating temperature, Tmin:-25 °C; Mass:0.99 kg; Static load, C0:40 kN; Fatigue limit load, Cu:1.82 kN; Max operating temperature, Tmax:110 °C; Characteristic inner ring frequency, BPFI:5.9 Hz; rs min:1.5 mm; da min:73 mm; B:23 mm; f0:14.4; |
| komatsu 21S-35-21210 IDLER | Weight:2.2 kg; C0:29.2 kN; C:43.55 kN; B:55.6 mm; A5:33.4 mm; s1:27.8 mm; Recommended tightening torque for set screw:16.8 Nm; S:22.2 mm; T max.:100 °C; G:M6x1; |
| komatsu 11Y-30-18110 IDLER | Basic Load Rating, Static Rating(N):53000; Fit:J7; Seal:Silicone; Bearing Inner Dia. Shape:Tapered hole adapter; Diameter series symbol:Used for Light load; Unit Body Material:Cast Iron; Bearing Unit, Type:Square flange shape; Unit, Type:Insert Bearing Unit; Machining:No; |
| komatsu 20S-30-72511 IDLER | G:M6x1; d1:32.4 mm; L:100 mm; Designation of bearing:EX204G2T20; s1:30.5 mm; Recommended tightening torque for set screw:5.5 Nm; A1:6 mm; Z:46.2 mm; A4:20.5 mm; C0:6.65 kN; |
| komatsu 207-30-48110 IDLER | RoHS:6; Load Direction:Radial; Basic Load Rating, Static Rating(N):1910; Size Standards:Metric System; B:8; Type:Ball; Volume Discount:Available; D:28; Outer Ring Shape:Flat; Number of Raceway Ring Rows:Single Row; |
| komatsu 208-30-53310 IDLER | Thickness, Height Indication:T, h Configurable; Bearing Used:Deep Groove Ball Bea; Holder Surface Treatment:Electroless Nickel P; RoHS:6; Seals:VV (Non-Contact Rubb; Bearing Part Number:6903; Bearing Material:[Steel] Steel; Type:Bearings with Housin; Lateral Width L(mm):64; Bearing I.D. d(mm):17; |
| komatsu 10S-30-21211 IDLER | G(mm):M8×1.25; Days to Ship:Quote; B(mm):12; Shaft Dia. (mm)(φ):8; C1(mm):9; H1(mm):42; Unit, Type:Joint Ball; |
| komatsu 14S-30-21611 IDLER | Weight:2.2 kg; C0:29.2 kN; C:43.55 kN; B:55.6 mm; A5:33.4 mm; s1:27.8 mm; Recommended tightening torque for set screw:16.8 Nm; S:22.2 mm; T max.:100 °C; G:M6x1; |