komatsu 6205-81-7610 body	Category:Single Row Ball Bear; Snap Ring:No; Internal Special Features:No; Min operating temperature, Tmin:-10 °C; Outer Race Width:0.315 Inch | 8 Milli; Enclosure Type:Contact Seal; ra max:0.3 mm; Mass:0.02 kg; Harmonized Tariff Code:8482.10.50.68;
komatsu 209-60-71510 body	H1:18 mm; d:30.16 mm; G:M6x1; H:90 mm; N:17mm; C0:11.2 kN; Designation of housing:PH206-; s1:34.1 mm; T max.:100 °C; Recommended tightening torque for set screw:8 Nm;
komatsu 567-13-16612 body	Rolling Element Material:Steel; Basic Dynamic Load Rating(N):7050; Size Standards:Metric System; Max. Allowed rpm(rpm):9800; RoHS:6; Type:Ball; Specifications/Environment:Standard / Dust Proo; Outer Ring Shape:Flat; Load Direction:Radial; Bearing Style:Rubber Sealed;
komatsu 708-23-07042 body	Recommended tightening torque for set screw:16.8 Nm; Weight:3.55 kg; T max.:100 °C; T min.:-20 °C; C:52.5 kN; H:238 mm; Designation of bearing:UC212-39G2L3; G:R1/8"; C0:32.8 kN; A2:70.7 mm;
komatsu 195-13-16110 body	H1:18 mm; d:30.16 mm; G:M6x1; H:90 mm; N:17mm; C0:11.2 kN; Designation of housing:PH206-; s1:34.1 mm; T max.:100 °C; Recommended tightening torque for set screw:8 Nm;
komatsu 6206-81-7611 body	H1:18 mm; d:30.16 mm; G:M6x1; H:90 mm; N:17mm; C0:11.2 kN; Designation of housing:PH206-; s1:34.1 mm; T max.:100 °C; Recommended tightening torque for set screw:8 Nm;
komatsu 6150-81-7810 body	H2:140 mm; L1:32 mm; G:R1/8"; C:52.5 kN; A:60 mm; H:69.9 mm; Z:30.5 mm; d:60 mm; Designation of housing:PAE212N-; N:M16;
komatsu 21N-62-18660 body	H1:18 mm; d:30.16 mm; G:M6x1; H:90 mm; N:17mm; C0:11.2 kN; Designation of housing:PH206-; s1:34.1 mm; T max.:100 °C; Recommended tightening torque for set screw:8 Nm;
komatsu 6150-81-7110 body	Flange Shape:Square Type; Bearing Used:Deep Groove Ball Bea; Type:Bearings with Housin; Bearing I.D. d(mm):5; Bearing Retained:Yes (with retaining; RoHS:6; Shape:Flanged Pilot Type; Flange O.D. H(φ):38; Volume Discount:Available; Number of Bearings:Double;
komatsu 144-13-16611 body	Static load, C0:1.96 kN; rs min:0.3 mm; Nlim (grease):28,000 rpm; d:8 mm; Fatigue limit load, Cu:0.09 kN; Radial clearance class:CN; B:9 mm; f0:12.4; da min:10 mm; Brand:NTN;