komatsu 209-60-71510 body | Weight:3.9 kg; C:52.5 kN; G:M6x1; T max.:100 °C; C0:32.8 kN; d:60 mm; J:202 mm; T min.:-20 °C; Z:44 mm; A1:20 mm; |
komatsu 425-12-11150 body | Number of Bearings:Double; Bearing Used:Deep Groove Ball Bea; RoHS:6; Volume Discount:Available; Seals:DD (Contact Rubber S; Shape:Flange Type; Bearing Part Number:6001; Housing Material:1045 Carbon Steel; Type:Bearings with Housin; |
komatsu 6212-61-1210 body | Recommended tightening torque for set screw:16.8 Nm; Weight:3.55 kg; T max.:100 °C; T min.:-20 °C; C:52.5 kN; H:238 mm; Designation of bearing:UC212-39G2L3; G:R1/8"; C0:32.8 kN; A2:70.7 mm; |
komatsu 795-602-2510 body | Flange Shape:Square Type; Bearing Used:Deep Groove Ball Bea; Type:Bearings with Housin; Bearing I.D. d(mm):5; Bearing Retained:Yes (with retaining; RoHS:6; Shape:Flanged Pilot Type; Flange O.D. H(φ):38; Volume Discount:Available; Number of Bearings:Double; |
komatsu 6150-81-7110 body | d1:71.2 mm; Characteristic inner ring frequency, BPFI:8.74 Hz; D:110 mm; Mass:1.18 kg; rs min:1.5 mm; Dynamic load, C:41.6 kN; Precision class:P0; d:50 mm; Y2:3.9; Characteristic rolling element frequency, BSF:5.81 Hz; |
komatsu 711-73-16710 body | Category:Single Row Ball Bear; Snap Ring:No; Internal Special Features:No; Min operating temperature, Tmin:-10 °C; Outer Race Width:0.315 Inch | 8 Milli; Enclosure Type:Contact Seal; ra max:0.3 mm; Mass:0.02 kg; Harmonized Tariff Code:8482.10.50.68; |
komatsu 723-30-81210 body | RoHS:6; Seals:ZZ (Double Shield); Type:Bearings with Housin; Height H(mm):40 ~ 80; Bearing Used:Deep Groove Ball Bea; Bearing Material:Stainless Steel; T(mm):40 ~ 60; Bearing Retained:No; Housing Material:304 Stainless Steel; |
komatsu TZ203B2107-01 body | Category:Single Row Ball Bear; Snap Ring:No; Internal Special Features:No; Min operating temperature, Tmin:-10 °C; Outer Race Width:0.315 Inch | 8 Milli; Enclosure Type:Contact Seal; ra max:0.3 mm; Mass:0.02 kg; Harmonized Tariff Code:8482.10.50.68; |
komatsu 6205-81-7610 body | H1:18 mm; d:30.16 mm; G:M6x1; H:90 mm; N:17mm; C0:11.2 kN; Designation of housing:PH206-; s1:34.1 mm; T max.:100 °C; Recommended tightening torque for set screw:8 Nm; |
komatsu 20Y-62-25154 body | H1:18 mm; d:30.16 mm; G:M6x1; H:90 mm; N:17mm; C0:11.2 kN; Designation of housing:PH206-; s1:34.1 mm; T max.:100 °C; Recommended tightening torque for set screw:8 Nm; |