komatsu TZ203B2107-01 body	Category:Single Row Ball Bear; Snap Ring:No; Internal Special Features:No; Min operating temperature, Tmin:-10 °C; Outer Race Width:0.315 Inch | 8 Milli; Enclosure Type:Contact Seal; ra max:0.3 mm; Mass:0.02 kg; Harmonized Tariff Code:8482.10.50.68;
komatsu 205-970-4261 body	d1:71.2 mm; Characteristic inner ring frequency, BPFI:8.74 Hz; D:110 mm; Mass:1.18 kg; rs min:1.5 mm; Dynamic load, C:41.6 kN; Precision class:P0; d:50 mm; Y2:3.9; Characteristic rolling element frequency, BSF:5.81 Hz;
komatsu 421-12-12183 body	H2:140 mm; L1:32 mm; G:R1/8"; C:52.5 kN; A:60 mm; H:69.9 mm; Z:30.5 mm; d:60 mm; Designation of housing:PAE212N-; N:M16;
komatsu 566-01-12145 body	H1:18 mm; d:30.16 mm; G:M6x1; H:90 mm; N:17mm; C0:11.2 kN; Designation of housing:PH206-; s1:34.1 mm; T max.:100 °C; Recommended tightening torque for set screw:8 Nm;
komatsu 795-602-2510 body	Weight:3.9 kg; C:52.5 kN; G:M6x1; T max.:100 °C; C0:32.8 kN; d:60 mm; J:202 mm; T min.:-20 °C; Z:44 mm; A1:20 mm;
komatsu 795-602-2510 body	RoHS:6; Seals:ZZ (Double Shield); Type:Bearings with Housin; Height H(mm):40 ～ 80; Bearing Used:Deep Groove Ball Bea; Bearing Material:Stainless Steel; T(mm):40 ～ 60; Bearing Retained:No; Housing Material:304 Stainless Steel;
komatsu 6150-81-7110 body	d1:71.2 mm; Characteristic inner ring frequency, BPFI:8.74 Hz; D:110 mm; Mass:1.18 kg; rs min:1.5 mm; Dynamic load, C:41.6 kN; Precision class:P0; d:50 mm; Y2:3.9; Characteristic rolling element frequency, BSF:5.81 Hz;
komatsu 6610-71-8710 body	d1:71.2 mm; Characteristic inner ring frequency, BPFI:8.74 Hz; D:110 mm; Mass:1.18 kg; rs min:1.5 mm; Dynamic load, C:41.6 kN; Precision class:P0; d:50 mm; Y2:3.9; Characteristic rolling element frequency, BSF:5.81 Hz;
komatsu 711-59-36610 body	Static load, C0:1.96 kN; rs min:0.3 mm; Nlim (grease):28,000 rpm; d:8 mm; Fatigue limit load, Cu:0.09 kN; Radial clearance class:CN; B:9 mm; f0:12.4; da min:10 mm; Brand:NTN;
komatsu 704-28-44012 body	Flange Shape:Square Type; Bearing Used:Deep Groove Ball Bea; Type:Bearings with Housin; Bearing I.D. d(mm):5; Bearing Retained:Yes (with retaining; RoHS:6; Shape:Flanged Pilot Type; Flange O.D. H(φ):38; Volume Discount:Available; Number of Bearings:Double;