komatsu 714-07-15460 body	Flange Shape:Square Type; Bearing Used:Deep Groove Ball Bea; Type:Bearings with Housin; Bearing I.D. d(mm):5; Bearing Retained:Yes (with retaining; RoHS:6; Shape:Flanged Pilot Type; Flange O.D. H(φ):38; Volume Discount:Available; Number of Bearings:Double;
komatsu 23B-950-2820 body	Recommended tightening torque for set screw:16.8 Nm; Weight:3.55 kg; T max.:100 °C; T min.:-20 °C; C:52.5 kN; H:238 mm; Designation of bearing:UC212-39G2L3; G:R1/8"; C0:32.8 kN; A2:70.7 mm;
komatsu 704-28-26230 body	Category:Single Row Ball Bear; Snap Ring:No; Internal Special Features:No; Min operating temperature, Tmin:-10 °C; Outer Race Width:0.315 Inch | 8 Milli; Enclosure Type:Contact Seal; ra max:0.3 mm; Mass:0.02 kg; Harmonized Tariff Code:8482.10.50.68;
komatsu 232-735-3110 body	Flange Shape:Square Type; Bearing Used:Deep Groove Ball Bea; Type:Bearings with Housin; Bearing I.D. d(mm):5; Bearing Retained:Yes (with retaining; RoHS:6; Shape:Flanged Pilot Type; Flange O.D. H(φ):38; Volume Discount:Available; Number of Bearings:Double;
komatsu 6206-61-1612 body	Category:Single Row Ball Bear; Snap Ring:No; Internal Special Features:No; Min operating temperature, Tmin:-10 °C; Outer Race Width:0.315 Inch | 8 Milli; Enclosure Type:Contact Seal; ra max:0.3 mm; Mass:0.02 kg; Harmonized Tariff Code:8482.10.50.68;
komatsu 234-43-39110 body	Designation of bearing:UC205-15G2L4; H2:72 mm; N:M10; B:34 mm; T min.:-20 °C; S:14.3 mm; Weight:0.71 kg; d:23.81 mm; C:14 kN; A1:23 mm;
komatsu 714-07-16110 body	Type:Bearings with Housin; Flange O.D. H(φ):59; RoHS:6; Bearing Retained:No; Bearing Used:Deep Groove Ball Bea; Days to Ship:7 Days; Number of Bearings:Double;
komatsu 6150-81-7110 body	d1:71.2 mm; Characteristic inner ring frequency, BPFI:8.74 Hz; D:110 mm; Mass:1.18 kg; rs min:1.5 mm; Dynamic load, C:41.6 kN; Precision class:P0; d:50 mm; Y2:3.9; Characteristic rolling element frequency, BSF:5.81 Hz;
komatsu 566-01-12154 body	Bearing Material:[Steel] Steel; Number of Bearings:Double; Bearing Used:Deep Groove Ball Bea; Bearing Retained:No; Housing Material:1045 Carbon Steel; Holder Surface Treatment:Black Oxide Coating; Seals:DD (Contact Rubber S; Shape:Bottom Mount;
komatsu 427-12-11151 body	Static load, C0:1.96 kN; rs min:0.3 mm; Nlim (grease):28,000 rpm; d:8 mm; Fatigue limit load, Cu:0.09 kN; Radial clearance class:CN; B:9 mm; f0:12.4; da min:10 mm; Brand:NTN;